Abstract:Al-Si alloys manufactured via high-pressure die casting (HPDC) are suitable for a wide range of applications. However, the heterogeneous microstructure and unpredictable pore distribution of Al-Si high-pressure die castings result in significant variations in the mechanical properties, thus leading to a complicated microstructure-property relationship that is difficult to capture. Hence, a computational framework incorporating machine learning and crystal plasticity method is proposed. This framework aims to provide a systematic and comprehensive understanding of this relationship and enable the rapid prediction of macroscopic mechanical properties based on the microstructure. Firstly, we select eight variables that can effectively characterize the microstructural features and then obtain their statistical information. Subsequently, based on 160 samples obtained via the Latin hypercube sampling method, representative volume elements are constructed, and the crystal plasticity fast Fourier transformation method is executed to obtain the macroscopic mechanical properties. Next, the yield strength, elastic modulus, strength coefficient, and strain-hardening exponent are used to characterize the stress-strain curve, and Gaussian process regression models and microstructural variables are developed. Finally, sensitivity and univariate analyses based on these machine-learning models are performed to obtain insights into the microstructure-property relationships of the HPDC Al-Si alloy. The results show that the Gaussian process regression models exhibit high accuracy ( R 2 greater than 0.84), thus confirming the viability of the proposed method. The results of sensitivity analysis indicate that the pore size exerts the most significant effect on the mechanical properties. Furthermore, the proposed framework can not only be transferred to other alloys but also be employed for material design.

3-D Microstructural Distribution and Mechanical Analysis of HPDC Hypereutectic Al-Si Alloys via X-Ray Tomography

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

Characterization of high-pressure die-cast hypereutectic Al-Si alloys based on microstructural distribution and fracture morphology

Crack Configuration Feature and Fracture Surface Difference for High Pressure Die Casting Hypereutectic Al-Si Alloys in High Cycle Fatigue

Quantitative Analysis of 3D Pore Characteristics Effect on the Ductility of HPDC Al-10Si-0.3Mg Alloy through X-Ray Tomography

Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography: A review

Fracture Behavior of a High Pressure Die Casting AlSi10MnMg Alloy with Varied Porosity Levels

On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 <i>wt</i>%Si alloy

Investigation on microstructure heterogeneity of the HPDC AlSiMgMnCu alloy through 3D electron microscopy

The Correlation Between Microstructure and Mechanical Properties of High-Pressure Die-Cast AM50 Alloy

Understanding microstructure-property relationships of HPDC Al-Si alloy based on machine learning and crystal plasticity simulation

In-situ investigation of damage mechanisms in duplex AlCoCrFeNi2.1 high entropy alloy

In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography

Correlative synchrotron absorption edge tomography and microtomography provide insights into the effect of element distribution within intermetallic phases on the fracture behaviour of cast Al-Si alloys

Characterization of externally solidified crystals in a high-pressure die-cast AlSi10MnMg alloy and their effect on porosities and mechanical properties

Characterization on the formation of porosity and tensile properties prediction in die casting Mg alloys

On the Failure Mechanism for High Pressure Die Casting A390 Hypereutectic Alloy in Low Cycle and High Cycle Fatique

The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy

The Influence of T6 Treatment on Fracture Behavior of Hypereutectic Al-Si HPDC Casting Alloy

Three-dimensional Quantitative in Situ Study of Crack Initiation and Propagation in AA 6061 Aluminum Alloy Sheets Via Synchrotron Laminography and Finite-Element Simulations

Microstructure based analysis and predictive modeling of cast Al7Si1.5Cu0.4Mg alloy mechanical properties