Abstract:For the first time, air plasma ablation behavior of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites was studied systematically under a heat flux of 5 MW/m2, which provided a quasi-real hypersonic service environment at a temperature up to 2430 °C. The Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC composites present excellent ablation-resistant performance with a linear recession rate of ∼2.89 μm/s and mass recession rate of ∼2.60 mg/s, which can be attributed to the dense and stable oxides layer formed on the sample surface. (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C is oxidized to high-entropy oxide (TiZrHfNbTa)Ox at the ablation center and highly viscous SiO2 melt with uniformly dispersed (TiZrHfNbTa)Ox microspheres is formed. While at the edge of the ablation center, precipitation occurs during cooling and the oxides layer turns to a plate-like (Hf0.5Zr0.5O2)’ skeleton surrounded by (TiNbTaO7-y)’ nanocrystals and continuous SiO2 melt. In contrast, oxidation of (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C to produce (Hf0.5Zr0.5O2)’ and (TiNbTaO7-y)’ is dominant at the ablation transition area and outer area with lower temperature. The multiphase oxides formed during ablation provide a stable and highly self-healing protective layer for the internal materials at ultra-high temperatures.

Revealing thermal ablation mechanisms of C/SiC with <i>in situ</i> optical observation and numerical simulation

Revealing thermal ablation mechanisms of C/SiC with in situ optical observation and numerical simulation

In-situ Testing of Surface Evolution of SiC During Thermal Ablation: Mechanisms of Formation, Flowing and Growth of Liquid Silica Beads

Evolution of surface droplets and flow patterns on C/SiC during thermal ablation

Formation Mechanisms of Characteristic Structures on the Surface of C/SiC Composites Subjected to Thermal Ablation

Understanding Laser Ablating Mechanism of Cf/SiC Composites: Micro Heat Transfer and Subsurface Microstructure Transformation

Ablation behavior of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration

Investigations on the ablation behavior of C/SiC under femtosecond laser

Bio‐Inspired Microstructure Design to Improve Thermal Ablation and Oxidation Resistance: Experiment on SiC

Laser ablation of SiC/SiC ceramic matrix composites: Morphological characterization, component evolution and oxidation mechanisms

Starting from essence to reveal the ablation behavior and mechanism of 3D PyC Cf/ZrC-SiC composite

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Ablation performance of C/C-ZrC-SiC composites with in-situ YSi 2 -doped ZrC-SiC-ZrSi 2 coating under oxyacetylene torch

Ceramic Matrix Composite Cyclic Ablation Behavior under Oxyacetylene Torch

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Ablation behavior of thin-blade co-deposited C/Cx-SiCy composites under the influence of the complex fluid conditions of the oxyacetylene torch

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Self‐defending mechanism of C/TaC‒SiC composites under 2100°C cyclic ablation environment

Multi-pulse femtosecond laser ablation of SiC/SiC composites: Morphological evolution, oxidation mechanisms and component characterization

High-temperature thermal expansion behaviour of C/SiC studied using an in-situ optical visualisation method and numerical simulations in a quartz lamp array heating environment