Abstract:Cf/SiC composites are advanced high-temperature materials for thermal protection and high-performance braking systems in the aerospace industry. Their surface wettability significantly affects the adhesion properties of the coatings. This study investigated the physical and chemical transformations of Cf/SiC composites during picosecond laser ablation and successfully fabricated micro-structured surfaces with super-hydrophilicity. The findings revealed that three-scale microstructures were formed on Cf/SiC composites after picosecond laser-ablating, which were orderly composed of regular convex plates (20–60 μm), agglomerate ablative products (1–5 μm), and nano particles (100–500 nm). The relative content of O on the laser-ablating surface was mostly>25%, both Si–O and Si–C bonds were found on the Si2p peak of the XPS spectrum. The primary content of the ablative products was crystalline and amorphous SiO2, resulting from the oxidation of the SiC matrix. The initial surface of the Cf/SiC composites was hydrophobic, and its contact angle was 92.7°. Conversely, the laser-ablating surfaces showed significant absorption of water droplets owing to the presence of the hydroxyl group in the amorphous SiO2, and the droplets quickly disappeared from the surface through the micro “tubular channels” caused by carbon fibers sublimating and oxidizing under the high laser temperature. Consequently, the superhydrophilic surfaces of the Cf/SiC composites were obtained via picosecond laser ablation, and the motion of the droplets was closely related to the laser power and scanning distance.

Formation Mechanisms of Characteristic Structures on the Surface of C/SiC Composites Subjected to Thermal Ablation

Revealing thermal ablation mechanisms of C/SiC with <i>in situ</i> optical observation and numerical simulation

Revealing thermal ablation mechanisms of C/SiC with in situ optical observation and numerical simulation

In-situ Testing of Surface Evolution of SiC During Thermal Ablation: Mechanisms of Formation, Flowing and Growth of Liquid Silica Beads

Evolution of surface droplets and flow patterns on C/SiC during thermal ablation

Understanding Laser Ablating Mechanism of Cf/SiC Composites: Micro Heat Transfer and Subsurface Microstructure Transformation

Investigations on the ablation behavior of C/SiC under femtosecond laser

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Self‐defending mechanism of C/TaC‒SiC composites under 2100°C cyclic ablation environment

Laser ablation of SiC/SiC ceramic matrix composites: Morphological characterization, component evolution and oxidation mechanisms

Microstructure and ablation behavior of C/C–HfC–SiC composites fabricated by reactive melt infiltration with Hf–Si alloy

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Ablation behavior of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration

Removal mechanism of SiC/SiC composites by underwater femtosecond laser ablation

Bio‐Inspired Microstructure Design to Improve Thermal Ablation and Oxidation Resistance: Experiment on SiC

Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C

Multi-pulse femtosecond laser ablation of SiC/SiC composites: Morphological evolution, oxidation mechanisms and component characterization

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Ceramic Matrix Composite Cyclic Ablation Behavior under Oxyacetylene Torch

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Fabricating physicochemical microstructures with super hydrophilicity on Cf/SiC composites surface via picosecond-laser induced ablation