Abstract:Degradation of high temperature ceramics caused by thermal ablation is a great challenge for maintaining structural integrity and stability under service conditions. In order to advance the understanding of the thermal ablation mechanisms of C/SiC composites, we adopt here the optical observation system to visualize the surface evolution of C/SiC in wind-tunnel test, and demonstrate experimentally the various flow characteristics of liquid SiO2 generated on the sample surface at different temperatures. Three different flow patterns (droplet flow, stream flow, and liquid film flow) corresponding to 1600 ℃, 1750 ℃, and 1950 ℃ were observed on the sample surface. Numerical simulation shows that the radius of the droplets plays a critical role in determining the flow patterns, as evidenced by the experiments. Droplets with large radius (≥0.5 mm) deform severely and cause “tailing”; droplets with small radius deform little under shear. We also observe that the large SiO2 droplet will continuously break into small droplets and eventually the droplets will oscillate with a certain radius. With the ablation rate increasing, a large number of droplets merge with each other to form a liquid film, and periodic K-H (Kelvin-Helmholtz) instability occurs at the gas-liquid interface.

Revealing thermal ablation mechanisms of C/SiC with in situ optical observation and numerical simulation

Revealing thermal ablation mechanisms of C/SiC with <i>in situ</i> optical observation and numerical simulation

In-situ Testing of Surface Evolution of SiC During Thermal Ablation: Mechanisms of Formation, Flowing and Growth of Liquid Silica Beads

Formation Mechanisms of Characteristic Structures on the Surface of C/SiC Composites Subjected to Thermal Ablation

Evolution of surface droplets and flow patterns on C/SiC during thermal ablation

Investigations on the ablation behavior of C/SiC under femtosecond laser

Ablation behavior of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration

Understanding Laser Ablating Mechanism of Cf/SiC Composites: Micro Heat Transfer and Subsurface Microstructure Transformation

Bio‐Inspired Microstructure Design to Improve Thermal Ablation and Oxidation Resistance: Experiment on SiC

High-temperature thermal expansion behaviour of C/SiC studied using an in-situ optical visualisation method and numerical simulations in a quartz lamp array heating environment

Starting from essence to reveal the ablation behavior and mechanism of 3D PyC Cf/ZrC-SiC composite

Laser ablation of SiC/SiC ceramic matrix composites: Morphological characterization, component evolution and oxidation mechanisms

Ablation performance of C/C-ZrC-SiC composites with in-situ YSi 2 -doped ZrC-SiC-ZrSi 2 coating under oxyacetylene torch

Ablation behavior of thin-blade co-deposited C/Cx-SiCy composites under the influence of the complex fluid conditions of the oxyacetylene torch

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Ceramic Matrix Composite Cyclic Ablation Behavior under Oxyacetylene Torch

Ablation properties and mechanisms of BN-coated Cf-reinforced SiBCNZr ceramic composites under an oxyacetylene combustion torch

Investigation of the bulging mechanism of C/SiC coating through in situ optical observation and numerical simulation

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Self‐defending mechanism of C/TaC‒SiC composites under 2100°C cyclic ablation environment

Spatio-temporal multi-scale observation of the evolution mechanism during millisecond laser ablation of SiC f /SiC