Abstract:The oxide layer formed by ultra‐high melt point oxides (ZrO2, HfO2) and SiO2 glassy melt is the key to the application of traditional thermal structural materials in extremely high‐temperature environment. However, the negative effect of ZrO2 and HfO2 phase transitions on the stability of oxide layer and rapid volatilization of low viscosity SiO2 melt limit its application in aerospace. In this study, the ablation behavior of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite was explored systematically via an air plasma ablation test, under a heat flux of 5 MW/m2 at temperatures up to 2450°C. The composite presents an outstanding ablation resistance, with linear and mass ablation rates of 0.9 μm/s and 1.82 mg/s, respectively. This impressive ablation resistance is attributed to the highly stable oxide protective layer formed in situ on the ablation surface, which comprises a solid skeleton of (Zr, Hf)6(Nb, Ta)2O17 combined with spherical particles and SiO2 glassy melt. The irregular particles provide a solid skeleton in the oxides protective layer, which increased stability of the oxide layer. Moreover, the spherical particles have a crystal structure similar to that of Ta2O5 and are uniformly distributed in SiO2 glassy melt, which hinder the flow of SiO2 glassy melt and enhance its viscosity to a certain degree. And it reduces the volatilization of SiO2. In summary, the stable oxide layer was formed by irregular particles oxide and the SiO2 glassy melt with certain viscosity, thereby resulting in the impressive ablation resistance of the composite. This study fills a gap in ablation research on the (CrZrHfNbTa)C system.

Evolution of surface droplets and flow patterns on C/SiC during thermal ablation

Revealing thermal ablation mechanisms of C/SiC with <i>in situ</i> optical observation and numerical simulation

Revealing thermal ablation mechanisms of C/SiC with in situ optical observation and numerical simulation

In-situ Testing of Surface Evolution of SiC During Thermal Ablation: Mechanisms of Formation, Flowing and Growth of Liquid Silica Beads

Ablation evolution of a new light weight silicon based thermal protection material in high temperature gas flow

Formation Mechanisms of Characteristic Structures on the Surface of C/SiC Composites Subjected to Thermal Ablation

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

The dominant factor of C/SiC composites in ablation environment with heat and particle flow

Bio‐Inspired Microstructure Design to Improve Thermal Ablation and Oxidation Resistance: Experiment on SiC

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Ablation of C/SiC, C/SiC-ZrO2 and C/SiC-ZrB2 composites in dry air and air mixed with water vapor

Self‐defending mechanism of C/TaC‒SiC composites under 2100°C cyclic ablation environment

Ablation behavior of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration

Ablation behavior and mechanisms of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite at temperatures up to 2450°C

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Laser Ablation Behavior of C/SiC Composites Subjected to Transverse Hypersonic Airflow

Laser ablation of SiC/SiC ceramic matrix composites: Morphological characterization, component evolution and oxidation mechanisms

Ceramic Matrix Composite Cyclic Ablation Behavior under Oxyacetylene Torch

Investigations on the ablation behavior of C/SiC under femtosecond laser

Ablation behavior of mullite modified C/C-SiC-HfC composites under oxyacetylene torch for single and cyclic ablations with two heat fluxes