Abstract:In a variable speed drive (VSD) system, high-frequency switching of power devices will cause large common-mode (CM) voltage during operation. While the CM voltage acts on the parasitic capacitance of the system, it will generate serious CM current on the motor side. It is necessary to model the VSD system so as to analyze and forecast the CM current theoretically. However, an essential condition of modeling CM current is to extract the CM impedance on the motor side of the system. In this paper, a novel extraction method for the CM impedance of an inverter-fed induction motor is proposed. First of all, time-domain waveforms of the CM voltage and current on the motor side of the VSD system are measured, and then mathematical calculations are performed to obtain the spectrum characteristics of the CM impedance on the motor side of the system. Compared to the traditional extraction methods of the impedance parameter by an impedance measurement or numerical calculation, the method proposed in this paper does not require laborious modeling of the motor or cable, and the extraction process is much simpler and easier. Moreover, in traditional methods, the motor impedance parameters are usually obtained in a nonworking state, while the proposed extraction method can be conducted in working state. Thus, the CM impedance extracted by the proposed method will be more accurate. Through comparing measurement and the simulation results of the CM current on motor side, the proposed CM impedance extraction method for an inverter-fed induction motor is validated.

Novel High-frequency Common-mode Model for Induction Machines in Conducted EMI Frequency Band

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

Modeling of Conducted EMI in Motor Drive System Based on Double Pulse Test and Impedance Measurement

A Fast EMI Model Based on Equivalent Interference Sources in Medium-Voltage Cascaded H-Bridge System

High-frequency modeling based EMC performance improvement of power supplies in inverters

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

An Improved Foster Model of Common-Mode Inductor and Its Application in EMI Filter Design

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

Modeling And Evaluation Of Common-Mode Interference Coupling Effects On Sensitive Cable In Motor Drive System

Time-frequency Characteristics Research of Common Mode Current in PWM Motor System

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

An iron core impedance model for calculating high frequency common mode currents and shaft voltages in inverter-fed AC machines

Common-Mode Resonance Suppression Strategy in High-Speed Compressor Drive

High-Frequency Modelling of Electrical Machines for EMC Analysis

Frequency Model for Differential-Mode Conducted Emi Prediction in Three-Phase Pwm Inverter

Impact of reduced common mode voltage PWM and common mode inductor on EMI characteristics of an inverter-driven motor

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV