Abstract:A finite element analysis (FEA)‐based mathematical method relying on the geometric and magnetic symmetry of coreless AFPM machines is proposed to estimate the machine performance indicators using the least number of FEA solutions, thereby significantly lowering the running time. Large‐scale design optimisation techniques enable the design of high‐performance electric machines. Electromagnetic 3D finite element analysis (FEA) is typically employed in optimisation studies for accurate analysis of axial flux permanent magnet (AFPM) machines, which require extensive computational resources. To reduce the computational burden, a FEA‐based mathematical method relying on the geometric and magnetic symmetry of coreless AFPM machines is proposed to estimate the machine performance indicators using the least number of FEA solutions, thereby significantly lowering the running time. This method is generally applicable to AFPM machines with low saturation effects and cogging torque as exemplified for a printed circuit board (PCB) stator coreless AFPM machine. To further reduce the computation time, a systematically simplified equivalent 3D FEA model for planar PCB coils integrated with this machine is also proposed. The practical implementation of the introduced method is elaborated based on an example optimisation study, and an analytical method for fast design scaling is also discussed. The results of the proposed approach are compared with detailed transient FEA results, and a prototype 26‐pole PCB stator coreless AFPM machine was also used to validate the results experimentally.

An iron core impedance model for calculating high frequency common mode currents and shaft voltages in inverter-fed AC machines

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

3-D Analytical Model of Armature Reaction Field Calculation for Ironless Axial Flux Permanent Maanet Motor

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

A High-Fidelity and Computationally Efficient Model for Interior Permanent-Magnet Machines Considering the Magnetic Saturation, Spatial Harmonics, and Iron Loss Effect

An Analytical Iron Loss Calculation Model of Inverter-Fed Induction Motors Considering Supply and Slot Harmonics

An Accurate Iron Core Loss Model in Equivalent Circuit of Induction Machines

Modeling, Simulation, and Analysis of Stator Windings of Induction Machines in High Frequencies

High-frequency Electric-Motor Modelling for Conducted CM Current Prediction in Adjustable Speed Drive System

Analysis Of Ac Losses In High-Speed Permanent Magnet Motors Based On The Equivalent Modeling Method

A Utility and Accurate Electrical Loss Model and Application for Induction Motors Utilizing 2-D Finite Element Analysis

Iron Loss Model for Rotating Machines Using Direct Eddy Current Analysis in Electrical Steel Sheets

Ultra‐fast finite element analysis of coreless axial flux permanent magnet synchronous machines

Analysis and Calculation of Three-dimensional Temperature Field of Inverter-fed Traction Motor

Measurement and Modelling of the Rotational Core Losses in an Induction Machine at Different Load Conditions