Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Analysis Of Ac Losses In High-Speed Permanent Magnet Motors Based On The Equivalent Modeling Method

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Analysis of AC Loss in High-Speed Switched Reluctance Motor for Electric Vehicle Considering Winding Axial Transposition

Dynamic Reluctance Mesh Modeling and Losses Evaluation of Permanent Magnet Traction Motor

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

A Fast Numerical Modeling Approach Based on Boundary Field Method for Calculating AC Losses in Superconducting Motors

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Investigation and Comparison of Different Calculation Methods for AC Copper Loss of Flat Copper Wire in Axial Flux Permanent Magnet Motor

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

Development of Equivalent Circuit Models of Permanent Magnet Synchronous Motors Considering Core Loss

A Utility and Accurate Electrical Loss Model and Application for Induction Motors Utilizing 2-D Finite Element Analysis

Nonlinear Analytical Model for Predicting Magnet Loss in Surface-Mounted Permanent-Magnet Motors

Analytical Modeling of Eddy Current Losses and Thermal Analysis of Non-Uniform-Air-Gap Combined-Pole Permanent Magnet Motors for Electric Vehicles

Analytical Calculation and Experimental Validation of 3D Rotor Eddy Current Loss in High-Speed Permanent Magnet Synchronous Motors

A High-Fidelity and Computationally Efficient Model for Interior Permanent-Magnet Machines Considering the Magnetic Saturation, Spatial Harmonics, and Iron Loss Effect

Modular Dynamic Equivalent Magnetic Network Modeling of YASA Type Axial Flux Permanent Magnet Motor