Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

A Utility and Accurate Electrical Loss Model and Application for Induction Motors Utilizing 2-D Finite Element Analysis

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Loss Investigation for Multiphase Induction Machine under Open-Circuit Fault Using Field–Circuit Coupling Finite Element Method

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

An Accurate Stray Loss Calculation Method Of Squirrel-Cage Induction Motors For Efficiency Optimization

Loss Estimation of Brushless Doubly-Fed Generator with Hybrid Rotor Considering Multiple Influence Factors

Piecewise Variable Parameter Loss Model of Laminated Steel and Its Application in Fine Analysis of Iron Loss of Inverter-Fed Induction Motors

Estimation of Iron Losses in Induction Motors: Calculation Method, Results, and Analysis

An Analytical Iron Loss Calculation Model of Inverter-Fed Induction Motors Considering Supply and Slot Harmonics

A General and Accurate Iron Loss Calculation Method Considering Harmonics Based on Loss Surface Hysteresis Model and Finite-Element Method

Modeling of iron losses of permanent-magnet synchronous motors

Analysis of iron losses in induction motor with an improved iron-loss model

Stray Load Loss Calculation for Induction Motor by Combination of General Airgap Field Modulation Theory and 2D FEA

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires

Investigation and Comparison of Different Calculation Methods for AC Copper Loss of Flat Copper Wire in Axial Flux Permanent Magnet Motor