Abstract:Due to the local inhomogeneous magnetic saturation of the core of the interior permanent magnet synchronous motor (IPMSM), the magnetic field changes nonlinearly, which makes the analytical calculation of the magnetic field difficult. Therefore, the calculation of the magnetic field mostly relies on the finite element method (FEM). However, the high computation cost of FEM restricts the efficiency of the design and analysis of IPMSM. In this article, an analytical model (AM) of slotless open-circuit air-gap magnetic field (OC-AG-MF) of IPMSM with V-shaped segmented skewed poles is derived by combining the subdomain method (SDM) and the magnetic equivalent circuit (MEC) method, and then, the AM of slotted OC-AG-MF of IPMSM with V-shaped segmented skewed poles is obtained by introducing the complex relative permeance. To show the effectiveness of the novel AM, the OC-AG-MF and cogging torque of an IPMSM with V-shaped segmented skewed poles for electric vehicles are calculated by the AM and FEM, respectively. The spatial order, amplitude–frequency characteristics, and the 3-D spatial distribution of the OC-AG-MF are analyzed. Finally, the accuracy of the AM is experimentally verified by direct measurement of OC-AG-MF and no-load back electromotive force (EMF) of the motor. The AM proposed in this article is shown to accurately calculate the radial and tangential components of OC-AG-MF of IPMSM with V-shaped segmented skewed poles considering rotor magnetic bridge saturation effect and stator slotting effect. Meanwhile, the efficiency of the design and analysis of the motor is expected to be improved due to the reduced computational effort compared to the prevalent FEM.

Stray Load Loss Calculation for Induction Motor by Combination of General Airgap Field Modulation Theory and 2D FEA

An Accurate Stray Loss Calculation Method Of Squirrel-Cage Induction Motors For Efficiency Optimization

Electromagnetic Performance Analysis and Optimization of Asynchronous Motors Based on Finite Element Analysis

Loss Investigation for Multiphase Induction Machine under Open-Circuit Fault Using Field–Circuit Coupling Finite Element Method

A Utility and Accurate Electrical Loss Model and Application for Induction Motors Utilizing 2-D Finite Element Analysis

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Loss Estimation of Brushless Doubly-Fed Generator with Hybrid Rotor Considering Multiple Influence Factors

Analytical Calculation of Magnetic Field Distribution and Stator Iron Losses for Surface-Mounted Permanent Magnet Synchronous Machines

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

A Hybrid Methodology for Analyzing the Performance of Induction Motors with Efficiency Improvement by Specific Commercial Measures

Analysis of iron losses in induction motor with an improved iron-loss model

Investigation and Comparison of Different Calculation Methods for AC Copper Loss of Flat Copper Wire in Axial Flux Permanent Magnet Motor

A Hybrid Analytical Mothod for On-Load Performance Prediction of Delta-Type IPM Motors Based on Equivalent Air-Gap Function

Open-Circuit Air-Gap Magnetic Field Calculation of Interior Permanent Magnet Synchronous Motor With V-Shaped Segmented Skewed Poles Using Hybrid Analytical Method

Estimation of Iron Losses in Induction Motors: Calculation Method, Results, and Analysis

No-load iron loss model for a fractional-slot surface-mounted permanent magnet motor based on magnetic field analytical calculation

Numerical Calculation and Analysis of Stator Iron Losses Due to Rotational Flux and Magnet Pole Eddy-Current Loss in PMSM

Optimization of an induction motor for loss reduction considering manufacturing tolerances

Analysis Of Ac Losses In High-Speed Permanent Magnet Motors Based On The Equivalent Modeling Method