Abstract:For ac/dc power conversion applications like server power supply, telecom power supply, and on-board charger of an electric vehicle, the rising electricity demand has presented challenges toward high efficiency and high power density. The cascaded H-bridge (CHB) based multilevel power factor correction (PFC) converter has much higher power density than that of traditional boost PFC converter. However, the CHB-PFC converter has multiple floating dc outputs, which leads to a common mode (CM) electromagnetic interference (EMI) issue due to the parasitic capacitance of cascaded dc/dc stages and layouts and distributed noise sources existing in the ac/dc system. Thus, a large EMI filter is necessary for the PFC system that sharply degrades the system's power density. In order to quantify the CM noise caused by the floating outputs and cascaded parasitic capacitance, a unified equivalent CM circuit model is derived in this article, which decouples the effects among the multiple CM noise sources in the CHB converter. Based on the derived circuit model, a mirror-bridge phase-shift modulation is proposed to cancel the CM noise within the CHB converter itself. A single-phase 2-kW CHB PFC prototype has been built up to verify the analysis, and 40-dB CM noise reduction compared with conventional unipolar modulation is achieved by the proposed modulation scheme.

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

An Improved Foster Model of Common-Mode Inductor and Its Application in EMI Filter Design

High Frequency Modeling of Common Mode Chokes for Electromagnetic Interference Analysis

Study of High Frequency Characteristics Modeling and EMI Suppression of Common Mode Chokes

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

High Frequency Modeling for Common Mode Chokes Based on Impedance Measurement

Elimination of Common-Mode Choke Saturation Caused by Self-Resonance of the EMI Filter in a Variable-Frequency Drive System

EMI Filter Design of SMPS Based on Integrated Choke

Design, Modeling, and Improvement of Integrated EMI Filter With Flexible Multilayer Foils

Modeling of Parasitic Inductive Couplings in a Pi-Shaped Common Mode EMI Filter

A Novel Common-Mode Conducted EMI Filter for Boost PFC Converter

Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

3 Kw Completely-Integrated EMI Filter Based on Flexible Multi-layer Foil

Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

PFC converter with novel integration of both EMI filter and Boost inductors

High-frequency modeling based EMC performance improvement of power supplies in inverters

Integrated filtering choke for SMPS with enhanced EMI noise suppression performance

Modeling and Characterization of Parasitic Inductive Coupling Effects on Differential-Mode EMI Performance of a Boost Converter

Principles and design on integrated EMI filters

Mirror-Bridge Phase-Shift Modulation With Low Common-Mode Noise for Single-Phase CHB PFC

Identification and Improvement of Stray Coupling Effect in an L-C-L Common Mode EMI Filter