Abstract:TiC is widely used as an ideal reinforcement to strengthen titanium matrix composites (TMCs). The morphology, size and distribution of TiC and the interfacial structure of TiC-Ti are crucial to obtain good mechanical properties of titanium matrix composites. These are keys to achieve superior strength and good ductility in titanium matrix composites. Hence, we investigated the effects of TiC generated in situ from different carbon sources (i.e., amorphous carbon nanoparticles , reduced graphene oxide and graphene nanoparticles) on the interfacial structure and mechanical properties of Ti60 alloy. Amorphous carbon nanoparticles (ACNS), reduced graphene oxide (rGO) and graphene nanoparticles (GNPs) reinforced Ti60 composites were prepared using spark plasma sintering (SPS). Among the three carbon nanomaterials, ACNs and rGO reacted with Ti60 matrix to form TiC, facilitating interfacial bonding. GNPs were not completely reacted with Ti60 matrix and residual on the interface owing to its poor dispersion effect, resulting in interfacial structure defects . The mechanical properties of the ACNs/Ti60 and rGO/Ti60 composites are high than GNPs/Ti60 composites. The ultimate tensile strengths of ACNs/Ti60 composites were 1173.49 MPa, 702.96 MPa and 653.13 MPa at room temperature, 600 °C and 650 °C, respectively, improving by 17.63%, 14.13% and 16.21% over Ti60, respectively. The superior mechanical properties are attributed to the fact that ACNs and rGO are more easily dispersed in the Ti60 matrix. The reaction activity of ACNs and rGO are higher than GNPs, and more TiC phase content was formed after sintering. TiC formed a semi-coherent interface with the Ti60 matrix, promoting the interfacial bonding strength. It also played a role in grain refinement and load transfer effect. This work helps to further elucidate the reinforcement effect of TiC formed by different carbon nanomaterials on TMC.

Microstructural Evolution and Mechanical Properties of Carbon Nanotubes–reinforced TZM Composites Synthesized by Powder Metallurgy

Microstructure and Properties of In-Situ TiC Reinforced Copper Nanocomposites Fabricated Via Long-Term Ball Milling and Hot Pressing

Microstructure and mechanical properties of TiC reinforced TZM composites prepared by spark plasma sintering

Mechanical milling and its influence on microstructure and electric conductivity of high mass fraction TiC / Cu composites

Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites

Investigation of Microstructure and Strengthening Mechanism in CNTs Reinforced Mo-based Composites

Simultaneous improvement of microstructure and high-temperature tensile properties in CNT-doped Mo-based composites

A Powder Metallurgy Route to Fabricate CNT-reinforced Molybdenum-Hafnium-carbon Composites

Microstructure and mechanical properties of nano-carbon reinforced Mo–Cu–Zr composites

Effect of carbon nanotubes on microstructure and mechanical properties of TiZrVMnCu–Er high entropy alloy composites

Study on the Properties of Carbon Nanotube (CNTs) Reinforced AlSi10Mg Composites Fabricated by Powder Metallurgy

Evolution of Microstructure and Mechanical Properties of CNTs/Al-Mg Composites Prepared by Powder Metallurgy

Effect of TiC content on the microstructure and mechanical properties of Ti-30Mo-xTiC composites

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

Synergistic strengthening behavior and microstructural optimization of hybrid reinforced titanium matrix composites during thermomechanical processing

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

Zirconia-based Nanocomposite Toughened by Functionalized Multi-Wall Carbon Nanotubes

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

The Influence of the Modification of Carbon Nanotubes on the Properties of Copper Matrix Sintered Materials

Constructing micro-network of Ti 2 Cu and in-situ formed TiC phases in titanium composites as new strategy for significantly enhancing strength