Abstract:Light mineral fillers are the natural inorganic materials of various compositions that have been used in a practical way since the beginning of the rubber industrial processing. Depending on the application, the natural kaolin is often modified by physical processes or by chemical processes (pillaring, adsorption, intercalation, functionalization, acid activation, etc.). It is important to modify kaolin due to improvement of its properties in order to adsorb the inorganic as well as organic molecules. In the introduced study, kaolin from Kaznějov deposit was modified by potassium acetate or dimethylsulphoxide and subsequently functionalized by accelerator dibenzothiazyldisulphide and its last modification was performed by silane treatment. Different techniques, such as the thermal (DTA) and spectral (FTIR) analysis were used to characterize modified kaolin samples. The main aim of the article is to observe the influence of modified kaolin forms on the physico-mechanical properties and structural changes of rubber mixtures. Combined with the carbon black, the given modified kaolin was mixed into a rubber blend in a particular ratio, which was5, 10, 24 phr. The effect of the modified kaolinite on the cure characteristics (minimum torque – M L, maximum torque – M H, optimal cure time – t 90, scorch time t s2) and mechanical properties (tensile strength at break – TS b, elongation at break – E b and hardness)in sulphur-cured rubber composites was investigated. In images from a scanning electron microscope (SEM), we observed the incorporation of modified forms of kaolin into the matrix of the rubber mixture.

Preparation and characterization of organic modified calcium carbonate by sodium stearate (or sodium oleate) using wet method

Mechano-activated Surface Modification of Calcium Carbonate in Wet Stirred Mill and Its Properties

Surface Modification of Halloysite/Sericite

INFLUENCE OF SURFACE-MODIFICATION FOR CALCIUM CARBONATE ON THE INTERACTION BETWEEN THE FILLERS AND POLYDIMETHYLSILOXANE

Mechanism of surface hydrophobicity modification of wollastonite powder

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Modification of Larger Size CaCO3particle with Polystyrene Viain Situemulsion Polymerisation

Surface Organic Modification Of Caco3-Tio2 Composite Pigment

Modification of the Filler based on Kaolin and its Use in the Polymer Composites

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Effect of Dispersants on the Stability of Calcite in Non-Polar Solutions

Mechanism on surface hydrophobically modification of fibrous wollastonite and its reinforcement of natural rubber

Surface modification of calcium carbonate: A review of theories, methods and applications

Thermal Treatment to Improve the Hydrophobicity of Ground CaCO3 Particles Modified with Sodium Stearate

Encapsulation of Carboxyl Polymer on the Surface of Nanometer Calcium Carbonate

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Assessment of efficacy of trivalent lanthanum complex as surface modifier of calcium carbonate

Surface Modification of Nano-calcium Carbonate by Composite Modifier

Research on Dispersing Performance of Magnesium Hydroxide Modified by Stearic Acid

Agglomeration in Water Medium of Calcium Carbonate Modified by Sodium Stearate and Its Mechanism