Abstract:The nanoencapsulation of hydrophobic compounds by miniemulsion polymerization, a convenient one-step encapsulation technique for nanocapsules, was investigated in terms of the thermodynamics and kinetics. The encapsulation was achieved by polymerization inducing phase separation within minidroplets dispersed in an aqueous phase. Thermodynamic factors (the level and type of surfactant, the level of the hydrophilic comonomer, and the monomer/paraffin ratio), kinetic factors (the level of the crosslinking agent or chain-transfer agent), and nucleation modes were all found to have a great influence on the latex morphology. Specifically, for a styrene/paraffin system, there were optimum levels of sodium dodecyl sulfate (1.0 wt %), the hydrophilic comonomer (1.0 wt % methyl acrylate acid), and the chain-transfer agent (0.2 wt % n-dodecanethiol) for obtaining well-defined nanocapsules of paraffin with a styrene/paraffin ratio of 1:1. When the styrene/paraffin ratio was reduced, however, it was more difficult to achieve a fully encapsulated particle morphology. Homogeneous nucleation could compete with encapsulation, and this resulted in a pure polymer particle and a half-moon morphology. Conditions were also found under which complete encapsulation could be observed with a water-soluble initiator (potassium persulfate), contrary to certain reports. Replacing potassium persulfate with an oil-soluble initiator (2,2-azo-bisisobutyronitrile) had little influence on the morphology under those conditions. (C) 2004 Wiley Periodicals, Inc.

Encapsulation of Carboxyl Polymer on the Surface of Nanometer Calcium Carbonate

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

Encapsulation of Nanometer Caco3 by Polymer Network

Encapsulation of Nanometer CaCO<sub>3</sub> by Polymer Network

STUDY ON ENCAPSULATION OF MODIFIED CaCO3 BY EMULSION COPOLYMERIZATION OF STYRENE AND CROSSLINKER

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Encapsulation of Calcium Carbonate by Styrene Polymerization

Network Encapsulation of Nanometer Caco3

Modification of Larger Size CaCO3particle with Polystyrene Viain Situemulsion Polymerisation

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

INFLUENCE OF SURFACE-MODIFICATION FOR CALCIUM CARBONATE ON THE INTERACTION BETWEEN THE FILLERS AND POLYDIMETHYLSILOXANE

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Study on Surface Modification of Nano-Calcium Carbonate in Ethanol and Its In-situ Composite

Preparation and Characterization of Nano-Caco3 Encapsulated with Polyacrylic and Its Application in Pvc Toughness

Preparation and Characterization of In-Situ Nano Calcium Carbonate/Polystyrene Composite

The Surface Modification of nano-Calcium Carbonate by In-situ Polymerization

Preparation and characterization of organic modified calcium carbonate by sodium stearate (or sodium oleate) using wet method

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)