Abstract:The nanoencapsulation of hydrophobic compounds by miniemulsion polymerization, a convenient one-step encapsulation technique for nanocapsules, was investigated in terms of the thermodynamics and kinetics. The encapsulation was achieved by polymerization inducing phase separation within minidroplets dispersed in an aqueous phase. Thermodynamic factors (the level and type of surfactant, the level of the hydrophilic comonomer, and the monomer/paraffin ratio), kinetic factors (the level of the crosslinking agent or chain-transfer agent), and nucleation modes were all found to have a great influence on the latex morphology. Specifically, for a styrene/paraffin system, there were optimum levels of sodium dodecyl sulfate (1.0 wt %), the hydrophilic comonomer (1.0 wt % methyl acrylate acid), and the chain-transfer agent (0.2 wt % n-dodecanethiol) for obtaining well-defined nanocapsules of paraffin with a styrene/paraffin ratio of 1:1. When the styrene/paraffin ratio was reduced, however, it was more difficult to achieve a fully encapsulated particle morphology. Homogeneous nucleation could compete with encapsulation, and this resulted in a pure polymer particle and a half-moon morphology. Conditions were also found under which complete encapsulation could be observed with a water-soluble initiator (potassium persulfate), contrary to certain reports. Replacing potassium persulfate with an oil-soluble initiator (2,2-azo-bisisobutyronitrile) had little influence on the morphology under those conditions. (C) 2004 Wiley Periodicals, Inc.

Encapsulation of Calcium Carbonate by Styrene Polymerization

STUDY ON ENCAPSULATION OF MODIFIED CaCO3 BY EMULSION COPOLYMERIZATION OF STYRENE AND CROSSLINKER

Network Encapsulation of Nanometer Caco3

Encapsulation of Nanometer Caco3 by Polymer Network

STUDIES ON BULK SYNDIOTACTIC POLYMERIZATION OF STYRENE CATALYZED BY METALLOCENE

Encapsulation of Nanometer CaCO<sub>3</sub> by Polymer Network

Preparation of monodisperse polystyrene particles and assembly of spherical colloidal crystals

Full‐range Kinetic Study on Bulk Syndiotactic Polymerization of Styrene with Homogeneous Metallocene Catalysis

Modification of Larger Size CaCO3particle with Polystyrene Viain Situemulsion Polymerisation

Preparation and Structure of Polystyrene/Montmorillonite Nanocomposite

Preparation of CaCO3/Polystyrene Inorganic/Organic Composite Nanoparticles

Encapsulation of Carboxyl Polymer on the Surface of Nanometer Calcium Carbonate

Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

A Nanocomposite Structure Based on Modified MCM-48 and Polystyrene

In-situ Emulsion Polymerization of Styrene in the Presence of Nano-Sio2

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Mechanism and Process of the Redispersion of the Aggregated Nano-Sio2 Particles During Emulsion Polymerization of Styrene

Styrene mini-emulsion polymerization co-stabilized by predissolved fluoropolymer