Abstract:The effect of the emulsification process of the organic n‐eicosane as a phase change material (PCM) in an aqueous solution of sodium dodecyl sulfate (SDBS) as a surfactant has been studied regarding the properties of the CaCO3 microcapsules. Such microcapsules aim to limit interactions between the PCM and the matrix (i.e., leakage and unwanted reactions). Optical and scanning electron microscopy (SEM) shows that the mean size of the n‐eicosane capsule is of the order of 5 μm. However, large non‐spherical objects which could be clusters of flocculated capsules or the results of encapsulation of coalescing n‐eicosane droplets, are observed, particularly when mechanical stirring (MS) is used rather than when an ultra‐turrax (UT) or sonotrode (S) is used in the initial emulsification step. These large, partially encapsulated objects could be the cause of the poor results in leakage tests. It is possible to encapsulate n‐eicosane inside a calcium carbonate shell, with a greater than 50% encapsulation ratio. The yield of encapsulated n‐eicosane measured by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) is similar and shows that 55% n‐eicosane core in CaCO3 shell can be produced. Up to 33 wt.% CaCO3 microcapsules (with 55% n‐eicosane content) have been successfully incorporated into fresh geopolymer paste. This incorporation of 18% (55% × 33%) of PCM does not modify the hardening conditions of the geopolymer since demolding was possible after 2 days at room temperature. DSC curves confirm that the melting reaction with n‐eicosane is conserved inside the hardened geopolymer.

STUDY ON ENCAPSULATION OF MODIFIED CaCO3 BY EMULSION COPOLYMERIZATION OF STYRENE AND CROSSLINKER

Encapsulation of Nanometer Caco3 by Polymer Network

Encapsulation of Nanometer CaCO<sub>3</sub> by Polymer Network

Network Encapsulation of Nanometer Caco3

Encapsulation of Calcium Carbonate by Styrene Polymerization

Modification of Larger Size CaCO3particle with Polystyrene Viain Situemulsion Polymerisation

Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

Encapsulation of Carboxyl Polymer on the Surface of Nanometer Calcium Carbonate

Preparation and Structure of Polystyrene/Montmorillonite Nanocomposite

A Nanocomposite Structure Based on Modified MCM-48 and Polystyrene

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Preparation of "micelles enhanced " polyelectrolyte capsules

Preparation of CaCO3/Polystyrene Inorganic/Organic Composite Nanoparticles

The Tough Microcapsules Of Acrylic Acid-Styrene-Isoprene-Styrene Quadrablock Copolymer Shell Via Pickering Emulsion Technique

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Preparation of Ps/Caco3 Composite Nanoparticles and Ps Hollow Nano-Spheres

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Effect of emulsification step on calcium carbonate encapsulated eicosane and incorporation into geopolymer

Composition Variation of Polymer Composite Particles in Styrene-Methyl Methacrylate Suspension-Emulsion Combined Polymerization

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier