Low-Temperature Baking Effect of the Radio-Frequency Nb<sub>3</sub>Sn Thin Film Superconducting Cavity
Ziqin Yang,Shichun Huang,Yuan He,Xiangyang Lu,Hao Guo,Chunlong Li,Xiaofei Niu,Pingran Xiong,Yukun Song,Andong Wu,Bin Xie,Zhiming You,Qingwei Chu,Teng Tan,Feng Pan,Ming Lu,Didi Luo,Junhui Zhang,Shenghu Zhang,Wenlong Zhan
DOI: https://doi.org/10.1088/0256-307X/38/9/092901
2021-01-01
Chinese Physics Letters
Abstract:The Nb3Sn thin film cavity, having the potential to be operated at a higher temperature and higher gradient compared to the cavity made from bulk niobium, is one of the most promising key technologies for the next-generation radio-frequency superconducting accelerators. In our work, several 1.3 GHz single-cell TESLA-shaped Nb3Sn thin film cavities, coated by the vapor diffusion method, were tested at Peking University and Institute of Modern Physics, Chinese Academy of Sciences. It was observed that the performance of the Nb3Sn thin film cavities in the tests without the slow cooling down procedure and the effective magnetic field shielding was significantly improved by using a low temperature baking at 100 degrees C for 48 hours. Although the peak electric field of the cavity remained unchanged, the rapid drop of the unloaded Q value (Q (0)) with the increasing accelerating field (Q-slope) was effectively eliminated, resulting in an improvement of the Q (0) in the intermediate field region by similar to 8 times. Furthermore, under better test conditions with the shielded magnetic field less than 5 mG and the slow cooling down procedure in the temperature range of 25-15 K, the Q (0) was still improved by about 20%. Our study shows that the low temperature baking can be an effective supplement to the effective post-treatment for the Nb3Sn thin film cavity.