Abstract:Combining the characteristics of semi-artificial thermocouple method and artificial thermocouple method,a new method of measuring cutting temperature is presented and named dynamic artificial thermocouple method.This method has the advantages of artificial thermocouple method without secondary calibration and cutting temperature of insulator can be measured,and it has the advantaget of semi-artificial thermocouple method that cutting temperature in cutting zone can be measured directly.By comparing temperatures in cutting zone during the process of milling aluminum panels measured by the new method and semi-artificial thermocouple method separately under same machining conditions,the measure accuracy of the new method is verified.The experiment demonstrates that the temperature measurements by using dynamic artificial thermocouple method are closed to those results by using semi-artificial thermocouple method.For thermocouple potential,the mean absolute percentage error is less than 2.5 ％ and the standard deviation is less than 0.9 mV.For temperature values,the mean absolute percentage error is less than 3％ and the standard deviation is less than 14 ℃.Furthermore,temperature variation in the cutting zone of epoxy resin is measured by using dynamic artificial thermocouple method and it is proved that this method can be used to measure cutting temperature in the cutting zone of insulator effectively.

An accurate dynamic method for determining pyroelectric coefficient of ferroelectric materials

Study On Pyroelectric Coefficient Measuring System Based On Dynamic Method

Dynamic Behavior of an Elastic/Pyroelectric Composite Hollow Sphere under Thermal Environments

Measurement of induced pyroelectric coefficient using dynamic method:theory calculations and experiments

Measurement system of pyroelectric coefficient for pyroelectric material using dynamic current method

Measurement of Induced Pyroelectric Coefficient Using Dynamic Method: Theory and Experiments

Dynamic Piezothermoelastic Responses of a Two-layered Composite Hollow Cylinder Constructed of Elastic and Pyroelectric Layers

Research on Dynamic Artificial Thermocouple Method

High Pyroelectric Performance Due to Ferroelectric–antiferroelectric Transition Near Room Temperature

ANALYTICAL SOLUTION OF A PYROELECTRIC HOLLOW CYLINDER FOR PIEZOTHERMOELASTIC AXISYMMETRIC DYNAMIC PROBLEMS

Molecular Ferroelectric Crystals with Superior Pyroelectricity, Plasticity, and Recyclability

High‐performance Pyroelectric Property Accompanied by Spin Crossover in a Single Crystal of Fe(II) Complex

High pyroelectric performance and its dependence on the field‐induced orientation in antiferroelectric PLZST system

PFM (piezoresponse force microscopy)-aided design for molecular ferroelectrics

Integrated Piezoelectric/Pyroelectric Sensing from Organic-Inorganic Perovskite Nanocomposites

Application of Pyroelectric Thin Films in Infrared Detectors

Dynamic pyroelectric response of PLT thin film

Realizing a Ferroelectric State and High Pyroelectric Performance in Antiferroelectric-Oxide Composites

Pyroelectric Polyvinylidene Fluoride Film Prepared by a Novel Combining Method and Its Application in Fully Flexible Infrared Detector

Dynamic pyroelectric response of multilayer pyroelectric detectors

Phase transition enhanced pyroelectric nanogenerators for self-powered temperature sensors