Abstract:Abstract Cutting temperature is playing a key role in evaluating the cutting process, which significantly affects the tool wear and the quality of the workpiece. Aiming at the problems of low precision, low aging, and poor stability of cutting temperature measurement on the front tool face, an integrated design and production scheme of a high sensitivity built-in wireless temperature measurement tool was proposed. The temperature distribution position on the front tool face was analyzed with 3D finite element simulation software, and the thermal contact position of the main and secondary film thermocouples was determined. SiO2 insulated films and NiCr/NiSi film thermocouples were prepared on the front tool surface by femtosecond laser micromachining, electrolyte-plasma polishing, plasma enhanced chemical vapor deposition and magnetron sputtering, and a static calibration experiment system for sensitivity and accuracy of the temperature measuring tool for the film thermocouple was established, and Seebeck coefficient of the film thermocouple was obtained. According to the actual cutting conditions, the wireless temperature measuring system of the thin film thermocouple tool was built and the field cutting test was carried out to obtain the influence law of different cutting parameters on the cutting temperature, and further verify the feasibility of the thin film temperature measuring sensor. The research results show that: Seebeck coefficients of the two kinds of thermocouples prepared by the NiCr/NiSi thin film thermocouple temperature measuring tool are 34.97 μV/°C and 34.96 μV/°C, and the slope of the temperature data fitting curve is 1.00398 and 0.997475, respectively. The linear correlation coefficient R2 is close to 1, which is close to the standard K-type thermocouple, which shows good sensitivity and accuracy. At the same time, the temperature measurement results are close to the commercial standard K thermocouple, and the error is less than 5%, indicating that the developed film thermocouple has a high measurement accuracy and can meet the needs of temperature measurement. Actual cutting test is carried out with developed wireless temperature measuring device of thin film thermocouple, which shows this device can meet the requirements of tool temperature measurement, and the feasibility of thin film temperature measuring sensor is further verified. The research provide technical reference for industrial intelligent manufacturing in order to realize the wireless measurement of cutting area temperature of tool front.

Research on Dynamic Artificial Thermocouple Method

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Dynamical Temperature Monitoring System Design for High-speed Cutting Based on Thin-film Thermocouples

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

An Improved Method for Acquisition of High-Speed Cutting Zone Temperature Based on Heat Conduction Reverse Seeking

Integrated design and fabricate of high sensitivity built-in thin-film thermocouple temperature measurement tool

A Locally Boron-Doped Diamond Tool for Self-Sensing of Cutting Temperature: Lower Thermal Capacity and Broader Applications

Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting

Research On Thermal Error Compensation Instrument Based On Thermal Modal Analysis For Nc Machine Tools

A Novel Approach to Measure the Chip Formation Temperature Using the Implanted Thermocouple Method

In-Process Cutting Temperature Monitoring Method Based on Impedance Model of Dielectric Coating Layer at Tool-Chip Interface

Temperature measurement performance of thin-film thermocouple cutting tool in turning titanium alloy

A novel method for fast identification of a machine tool selected point temperature rise based on an adaptive unscented Kalman filter

Cutting temperature measurement in turning using fiber-optic multi-spectral radiation thermometry and its application in tool wear status recognition

Development of a tool-workpiece thermocouple system for comparative study of the cutting temperature when high-speed ultrasonic vibration cutting Ti-6Al-4V alloys with and without cutting fluids

Method of Precisely Measuring Tool Nose Temperature in Machining with Help of FEM Heat Transfer Analysis

A Micromachined Device Using Transient Hot-Wire Method For High Accuracy Thermal Conductivity Measurement Of Semi-Rigid Materials

Research on composite multipoint thermometric system of CNC machine tools based on ARM9

REAL-TIME MEASUREMENT OF MACHINE TOOL TEMPERATURE FIELDS AND THEIR EFFECT ON MACHINING ERRORS

A Comparative Review of Thermocouple and Infrared Radiation Temperature Measurement Methods during the Machining of Metals

Research on Thermal Error Compensation Technology of CNC Machine Tool Under Real Cutting Condition