Abstract:Abstract Cutting temperature is playing a key role in evaluating the cutting process, which significantly affects the tool wear and the quality of the workpiece. Aiming at the problems of low precision, low aging, and poor stability of cutting temperature measurement on the front tool face, an integrated design and production scheme of a high sensitivity built-in wireless temperature measurement tool was proposed. The temperature distribution position on the front tool face was analyzed with 3D finite element simulation software, and the thermal contact position of the main and secondary film thermocouples was determined. SiO2 insulated films and NiCr/NiSi film thermocouples were prepared on the front tool surface by femtosecond laser micromachining, electrolyte-plasma polishing, plasma enhanced chemical vapor deposition and magnetron sputtering, and a static calibration experiment system for sensitivity and accuracy of the temperature measuring tool for the film thermocouple was established, and Seebeck coefficient of the film thermocouple was obtained. According to the actual cutting conditions, the wireless temperature measuring system of the thin film thermocouple tool was built and the field cutting test was carried out to obtain the influence law of different cutting parameters on the cutting temperature, and further verify the feasibility of the thin film temperature measuring sensor. The research results show that: Seebeck coefficients of the two kinds of thermocouples prepared by the NiCr/NiSi thin film thermocouple temperature measuring tool are 34.97 μV/°C and 34.96 μV/°C, and the slope of the temperature data fitting curve is 1.00398 and 0.997475, respectively. The linear correlation coefficient R2 is close to 1, which is close to the standard K-type thermocouple, which shows good sensitivity and accuracy. At the same time, the temperature measurement results are close to the commercial standard K thermocouple, and the error is less than 5%, indicating that the developed film thermocouple has a high measurement accuracy and can meet the needs of temperature measurement. Actual cutting test is carried out with developed wireless temperature measuring device of thin film thermocouple, which shows this device can meet the requirements of tool temperature measurement, and the feasibility of thin film temperature measuring sensor is further verified. The research provide technical reference for industrial intelligent manufacturing in order to realize the wireless measurement of cutting area temperature of tool front.

Method of Precisely Measuring Tool Nose Temperature in Machining with Help of FEM Heat Transfer Analysis

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

Dynamical Temperature Monitoring System Design for High-speed Cutting Based on Thin-film Thermocouples

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Research on Dynamic Artificial Thermocouple Method

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Fem-based design and analysis of a smart cutting tool with internal cooling for cutting temperature measurement and control

An Improved Method for Acquisition of High-Speed Cutting Zone Temperature Based on Heat Conduction Reverse Seeking

An Innovative Method to Measure the Cutting Temperature in Process by Using an Internally Cooled Smart Cutting Tool

Cutting temperature measurement in turning using fiber-optic multi-spectral radiation thermometry and its application in tool wear status recognition

A Method for Thermal Performance Modeling and Simulation of Machine Tools

Analysis of Thermal Characteristics with Multi-Physics Coupling for the Feed System of a Precision CNC Machine Tool

A Locally Boron-Doped Diamond Tool for Self-Sensing of Cutting Temperature: Lower Thermal Capacity and Broader Applications

Three-dimensional thermo–elastic–plastic coupled FEM simulations for metal oblique cutting processes

CUTTING TEMPERATURE MEASUREMENT IN HIGH-SPEED END MILLING

REAL-TIME MEASUREMENT OF MACHINE TOOL TEMPERATURE FIELDS AND THEIR EFFECT ON MACHINING ERRORS

Integrated design and fabricate of high sensitivity built-in thin-film thermocouple temperature measurement tool

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System

Robust, fractal theory, and FEM-based temperature field analysis for machine tool spindle

Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling