Abstract:Heterogeneous W-steel joining components will produce brittle intermetallic compounds (IMCs) and significant residual stress in the interface. Adding a Cu interlayer serves as an effective solution. Nevertheless, the strengthening of W-Cu-steel joints is restricted because W-Cu and Cu-steel are members of binary immiscible and finite solid solution systems. Thus, accomplishing interface alloying by overcoming the positive generating energy of insoluble systems and opening up interatomic diffusion channels is a crucial issue to be addressed. In this work, casting and brazing technologies were incorporated into bonding W-Cu-steel to provide a high temperature field, as well as the dissolving and wetting of Cu-based liquid phase to refractory W. It is shown that the superior tensile strength of the W/Cu castings-steel brazed joints (similar to 264 MPa) was achieved, and the joint survived 1000 cycles of thermal fatigue under 1 MW/m(2). To assess the effects of brazing and casting on the W-Cu-steel joint, a detailed analysis was conducted on the mechanism of atomic diffusion in the joint interface. It is considered that in W-Cu joining, casting provided a higher thermodynamic driving force than brazing, thus achieving better interatomic diffusion and a wider microalloying region. Cu-steel joining achieved good alloying and forming dendritic extensions by intergranular diffusion. Based on the process optimization results, the feasibility of preparing the U-shaped first wall (FW) mock-up with W armor using brazing technology was verified. This study provides a new technological path, offering a major design and manufacturing guide for plasma facing components (PFCs).

W/Cu Joining Strengthened by Femtosecond Laser Induced Micron-Scale Interface Structure

Femtosecond Laser Fabricated Micro/nano Interface Structures Toward Enhanced Bonding Strength and Heat Transfer Capability of W/Cu Joining

Comprehensive Enhancement of the Mechanical and Thermo-Mechanical Properties of W/Cu Joints Via Femtosecond Laser Fabricated Micro/nano Interface Structures

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Improving the Interface Strength and Fatigue Property of W-Cu-steel Brazed Joint Via Induced Interface Alloying

Study on the effect of vacuum fusion infiltration technology on the properties of tungsten/copper joining interface

Influence of Laser Texturing on Interfacial Bonding Strength of W/Cu Joint by Spark Plasma Sintering

Interlocked interface of W–Y2O3/CuCrZr joint obtained by W–Y2O3 surface nanoporosification and Cu magnetron sputtering

Interfacial evolution mechanism of W/Cu explosive welding interface affected by preheating

High-strength Vacuum Diffusion Bonding of Cu-plated, Sandblasted W and CuCrZr Alloy

Strengthening Mechanisms and Research Progress in the W/Cu Interfaces

Microstructure and mechanical properties of W/Cu vacuum diffusion bonding joints using amorphous Fe–W alloy as interlayer

Laser-induced thermo-compression bonding for Cu-Au heterogeneous nanojoining

Diffusion bonding and interface structure of advanced carbide-dispersion-strengthened Cu and oxide-dispersion-strengthened W

Investigation on the interfacial microstructure and mechanical properties of the W-Cu joints fabricated by hot explosive welding

Direct joining of quartz glass and copper by nanosecond laser

Microhardness and Tensile Strength Analysis of SS316L/CuCrZr Interface by Laser Powder Bed Fusion

Enhancing strength-ductility properties of immiscible W-Cu composite by creating low-energy phase interfaces

Effect of bonding process on the microstructures and strength of W/steel joints with a W-Cu-Ni interlayer

Mechanism and optimization of femtosecond laser welding fused silica and aluminum

Interfacial microstructure and reaction mechanism with various weld fillers on laser welding-brazing of Al/Cu lap joint