Abstract:Nanostructure reinforced nitride ceramics play an important role in the family of structural ceramics. In this study, large scale of one-dimensional (1D) beta-sialon nanostructures and beta-sialon-beta-Si3N4 composite powders were synthesized simultaneously via a reduction nitridation process by using powders of silicon, aluminum, and silica as raw materials. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM/HRTEM), Fourier-transform infrared spectroscopy (FT-IR) and energy dispersive x-ray spectroscopy (EDS) were used to characterize the phase composition, morphology, and microstructure of the as-obtained products. As a result, large scale of 1D beta-sialon nanostructures can be prepared at 1600 degrees C. The diameter of the as-prepared nanowires in the range of 80 to 170 nm can be tailored by the addition of aluminum. The growth of 1D beta-sialon nanostructures is achieved by a vapor-solid (VS) mechanism. Photoluminescence (PL) of the 1D beta-sialon nanostructures was characterized which exhibit violet/blue emission peaks, making it have the potential to be applied in optoelectronic nanodevices. Besides, nitride ceramic composite powders including beta-Si3N4 and beta-sialon with in situ formed beta-sialon nanowires were also achieved. The phase transformation behavior and the thermodynamical analysis of the ceramic composite powders were also studied by characterizing the phase composition of the products synthesized at different temperature. The as-grown beta-sialon nanowires and the composite powders have great potential to be applied in nanostructure reinforced structural ceramics.

Preparation of beta sialon/SiC composite powder by carbothermal reaction of coal mine schist

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

The study on the mechanism of carbothermal reduction of coal mine schist

Effect of temperature on preparation of β-sialon/SiC composite ceramics powder made from coal-mine schist

Preparation of SiC Coated Graphite Composite Powders by Nitriding Combustion Synthesis

Synthesis of Fe-Sialon Composites Using High Alumina Coal Gangue by Carbothermal Nitridation

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

In-Situ Synthesis of (O′+β)-Sialon/mullite Composite Materials from Coal Gangue

Coarse‐grained Β‐si3n4 Powders Prepared by Combustion Synthesis

Synthesis of β-SiAlON-SiC composites from coal gangue based β-SiAlON

Preparation Of Al2o3-Sic Composite Powder From Kyanite Tailings Via Carbothermal Reduction Process

Preparation of Al2O3-SiC Composite Powder by Carbothermal Reduction of Coal Gangue and Its Influence on Properties of Blast Furnace Stemming

Coarse‐grained β‐Si 3 N 4 powders prepared by combustion synthesis

Preparation of SiC Powders by Carbothermal Reduction with Bamboo Charcoal As Renewable Carbon Source

The Preparation of Β-Sialon Powder from High-Alumina Fly Ash: an Experimental Study

Recent Progress in Study of Preparation of AlN-SiC Composite Ultrafine Powder

Synchronistic Preparation of Fibre-Like Sic and Cubic-Zro2/Sic Composite from Zircon Via Carbothermal Reduction Process

Low-temperature formation of nanocrystalline β-SiC with high surface area and mesoporosity via reaction of mesoporous carbon and silicon powder

Growth mechanism and synchronous synthesis of 1D beta-sialon nanostructures and beta-sialon-Si3N4 composite powders by a process of reduction nitridation

Synthesis of Β-Sialon/ti(c,n) Composites Using Low and Middle Grade Bauxite and Ilmenite by Carbothermal Reduction-Nitridation

Preparation of Silicon Carbide Using Bamboo Charcoal As Carbon Source