Abstract:Sialon-Ti(N,C) composites were synthesized using pyrophyllite, rutile and coke powers as raw materials via carbothermal reduction-nitridation reaction. Phase composition, microstructure and micro-area element of the synthesized resultant were analyzed by X-ray diffractometer, scanning electron microscope and energy dispersive spectrometer. The effects of synthesis temperature and carbon addition content on phase compositions and mierostructure of the resultants were investigated. The results showed that the main phases of the samples which were composed of pyrophyllite and rutile with a mass ratio of 4:1, with addition of 50% excessive carbon, synthesized at 1 500 ℃ were β-sialon, 15R-sialon, TiN0.7C0.3, corundum, and a little β-SIC. Content of β-sialon and TiN0.7C0.3 increased with the increase of the synthesis temperature from 1 400 ℃ to 1 550 ℃. The content of carbon addition had an important influence on phase composition when the samples were synthesized at same temperature. It was beneficial for synthesizing sialon-TiCN,C) composite material when 50% excessive carbon was added in the samples. O'-sialon and Si2N20 will appear in resultants while the addition of carbon content was small, but β-sialon will transform to 15R-sialon while too much carbon added in the samples.The grain size of TiN0.TC0.3 crystal in sialon-Ti(N,C) composites was about 200 nm when 50% excessive carbon added in sample and synthesized at 1 500 ℃.

The study on the mechanism of carbothermal reduction of coal mine schist

Preparation of beta sialon/SiC composite powder by carbothermal reaction of coal mine schist

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

Effect of temperature on preparation of β-sialon/SiC composite ceramics powder made from coal-mine schist

Synthesis of Fe-Sialon Composites Using High Alumina Coal Gangue by Carbothermal Nitridation

In-Situ Synthesis of (O′+β)-Sialon/mullite Composite Materials from Coal Gangue

Carbothermal Reduction of SiO2 Using Different Coal

Synthesis of Β-Sialon/ti(c,n) Composites Using Low and Middle Grade Bauxite and Ilmenite by Carbothermal Reduction-Nitridation

Phase Behavior of Silica Brick Used in Carbothermal Reduction

Phase Behavior Analysis of Low-Grade Bauxite and Rutile by Carbothermal Reduction-Nitridation

Synthesis of Sialon-Ti(N,C) Composites Via Carbothermal Reduction-Nitridation from Pyrophyllite and Rutile

Carbothermal/aluminothermic Reduction Nitridation Synthesis of ZrN–SiAlON Refractory Composites from Zircon and Bauxite: a Comparative Study of the Reduction Effect of Reducers

Preparation Of Al2o3-Sic Composite Powder From Kyanite Tailings Via Carbothermal Reduction Process

Phase behaviors of talc minerals in carbothermal reduction process

Phases transformation of high-alumina fly ash under carbothermal reduction and nitridation

Preparation of Al2O3-SiC Composite Powder by Carbothermal Reduction of Coal Gangue and Its Influence on Properties of Blast Furnace Stemming

Fabrication and Liquid–solid, Two-Phase Erosion Wear Behaviour of Β-Sialon Ceramic from Pyrophyllite by Carbothermal Reduction and Nitridation

Synthesis of Sialon-SiC Composites from Kyanite Tailings by Carbothermal Reduction Nitridation

Effect of Reaction Temperature on the Synthesis of Β-Sialon/ti(c, N) Composites from Low Grade Bauxite and Ilmenite

Preparation of SiC Powders by Carbothermal Reduction with Bamboo Charcoal As Renewable Carbon Source

The Preparation of Β-Sialon Powder from High-Alumina Fly Ash: an Experimental Study