Abstract:Bulk glassy Cu–Zr–Ti base alloys containing a small amount of Nb or Ta were found to exhibit high strength combined with significant plastic elongation. The glass transition temperature (Tg), crystallization temperature (Tx) and ΔTx(=Tx−Tg) of the Cu-based bulk glassy alloys are in the range of 719 to 731 K, 765 to 769 K and 46 to 44 K, respectively, for the Nb-containing alloy and 716 to 741 K, 752 to 780 K and 44 to 34 K, respectively, for the Ta-containing alloy. With increasing Nb or Ta content to 3 at% for the (Cu0.6Zr0.3Ti0.1)100−xMx alloys, the Young’s modulus, yield strength and compressive fracture strength increase from 114 to 121 GPa, 1785 to 2010 MPa and 2150 to 2250 MPa, respectively, and the plastic elongation shows a maximum of 1.8% at 1%Nb and 3.4% at 1%Ta. The 1%Ta alloy exhibited good combination of high fracture strength of 2250 MPa and large total elongation of 5.4%. The effectiveness of additional Nb or Ta on the increase in elongation and fracture strength is presumably due to the mixed state of atomic pairs with attractive and repulsive bonding natures among the constituent elements with significantly different atomic size mismatches. The success of forming the bulk glassy alloys with high strength and significant elongation is encouraging for future applications as high-strength type materials.

Formation , Thermal Stability and Mechanical Properties of ( Cu 0 . 6 Zr 0

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

The characterisation of atomic structure and glass-forming ability of the Zr–Cu–Co metallic glasses studied by molecular dynamics simulations

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Formation of Ni–Nb–Zr–X (X = Ti, Ta, Fe, Cu, Co) Bulk Metallic Glasses

Thermal Stability and Mechanical Properties of Bulk Glassy Cu-Zr-Ti-(Nb, Ta) Alloys

Preparation of (ti0.45cu0.378zr0.10ni0.072)100−xsnx Bulk Metallic Glasses

Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses

Bulk metallic glass formation in the (Ti,Zr)-(Ni,Cu)-S system

Failure behavior of Cu–Ti–Zr-based bulk metallic glass alloys

Unusual Solidification Behavior of a Zr–Cu–Ni–Al Bulk Glassy Alloy Made from Low-Purity Zr

Metallic glass formation in Cu–Ni–Ti (Zr, Hf) systems studied by thermodynamic calculations

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

Preparation, Characterization, and Properties of Novel Ti-Zr-Be-Co Bulk Metallic Glasses.

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

Glass Forming Abilities of Binary Cu100−xZrx (34, 35.5, and 38.2 At. %) Metallic Glasses: A LAMMPS Study