Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Growth and characteristics of vertically-aligned carbon nanotubes by thermal CVD on various Si-based substrates for micro-DMFC

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Electrocatalytic properties improvement on carbon-nanotubes coated reaction surface for micro-DMFC

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

On-line intermittent growth of carbon nanotubes in a self-made tapered fluidized bed reactor at different inlet distances

Investigation on the Formation Mechanism of Double-Layer Vertically Aligned Carbon Nanotube Arrays via Single-Step Chemical Vapour Deposition

Carbon nanotubes over novel catalysts

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

Air and O2-Assisted Catalytic VACNT Growth Optimization for Uniformity and Throughput

Enhanced cold wall CVD reactor growth of horizontally aligned single-walled carbon nanotubes

Electrocatalytic Properties Improvement on Carbon-Nanotubes Coated Reaction Surface for μDMFC

Synthesis of Vertically-Aligned Cnt Arrays from Diameter-Controlled Fe3o4 Nanoparticles

Carbon nanotube growth for through silicon via application

The growth of multi-walled carbon nanotubes with different morphologies on carbon fibers

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Carbon dioxide-boosted growth of high-density and vertically aligned carbon nanotube arrays on a stainless steel mesh

Manipulating microstructural properties of carbon nanofibers and their applications in catalysis

Spatial confined growth of carbon nanotubes in pore channels of microporous ceramic supports with improved filtration efficiency

Chemical Vapor Deposition of Vertically Aligned Carbon Nanotube Arrays: Critical Effects of Oxide Buffer Layers