Abstract:Nuclear magnetic resonance (NMR) experiments on subnanoliter (sub-nL) volumes are hindered by the limited sensitivity of the detector and the difficulties in positioning and holding such small samples in proximity of the detector. In this work, we report on NMR experiments on liquid and biological entities immersed in liquids having volumes down to 100 pL. These measurements are enabled by the fabrication of high spatial resolution 3D printed microfluidic structures, specifically conceived to guide and confine sub-nL samples in the sub-nL most sensitive volume of a single-chip integrated NMR probe. The microfluidic structures are fabricated using a two-photon polymerization 3D printing technique having a resolution better than 1 μm3. The high spatial resolution 3D printing approach adopted here allows to rapidly fabricate complex microfluidic structures tailored to position, hold, and feed biological samples, with a design that maximizes the NMR signals amplitude and minimizes the static magnetic field inhomogeneities. The layer separating the sample from the microcoil, crucial to exploit the volume of maximum sensitivity of the detector, has a thickness of 10 μm. To demonstrate the potential of this approach, we report NMR experiments on sub-nL intact biological entities in liquid media, specifically ova of the tardigrade Richtersius coronifer and sections of Caenorhabditis elegans nematodes. We show a sensitivity of 2.5x1013 spins/Hz1/2 on 1H nuclei at 7 T, sufficient to detect 6 pmol of 1H nuclei of endogenous compounds in active volumes down to 100 pL and in a measurement time of 3 hours. Spectral resolutions of 0.01 ppm in liquid samples and of 0.1 ppm in the investigated biological entities are also demonstrated. The obtained results may indicate a route for NMR studies at the single unit level of important biological entities having sub-nL volumes, such as living microscopic organisms and eggs of several mammalians, humans included.

Fabricated on the capillary surface by cylindrical projection lithography for nmr application

Fabrication of microcoil/microsprings for novel chemical and biological sensing

5-Axis CNC Micromilling for Rapid, Cheap, and Background-Free NMR Microcoils

A novel MEMS compatible lab-on-a-tube technology.

Exploration of Materials for Three-Dimensional NMR Microcoil Production via CNC Micromilling and Laser Etching

Fabrication of Electromagnetically-Driven Tilted Microcoil on Polyimide Capillary Surface for Potential Single-Fiber Endoscope Scanner Application.

The design and fabrication of a low-field NMR probe based on a multilayer planar microcoil

Electromagnetic Properties of Metal Coated-Micro/nano Coils Fabricated by Self-deformation

Fabrication of three-dimensional micro-Rogowski coil based on femtosecond laser micromachining

Facile Fabrication of True Three-Dimensional Microcoils Inside Fused Silica by A Femtosecond Laser

3D printed microchannels for sub-nL NMR spectroscopy

Process for the fabrication of complex three-dimensional microcoils in fused silica.

3D-Printed Integrative Probeheads for Magnetic Resonance

Design and Fabrication of Micro RF Coil for MRI

High-level Integration of Three-Dimensional Microcoils Array in Fused Silica

Fabrication of Microcoil with Large Tilt-Angle on Polymer Tube for Electromagnetically-Driven Scanner in Single Fiber Endoscope

Fabrication Of 3d Solenoid Microcoils In Silica Glass By Femtosecond Laser Wet Etch And Microsolidics

Assembly of Alginate Microfibers to Form a Helical Structure Using Micromanipulation with a Magnetic Field

Fabrication, detection and operation of a three-dimensional nanomagnetic conduit

Nanofabricated high turn-density spiral coils for on-chip electromagneto-optical conversion

3D Printed Micro-Mechanical Device (MMD) for in Situ Tensile Testing of Micro/nanowires