Monitoring the Setting and Hardening Behaviour of Cement Paste by Electrical Resistivity Measurement

Farqad Yousuf,Xiaosheng Wei,Jiangyin Zhou

DOI: https://doi.org/10.1016/j.conbuildmat.2020.118941

IF: 7.4

2020-01-01

Construction and Building Materials

Abstract:Electrical resistivity measurements by a non-contact method successfully characterised the early age properties of cement pastes, showing good agreement with results of other conventional methods, such as the Vicat needle, heat of hydration, and scanning electron microscopy observations. The setting and hardening behaviour of cement pastes with different dosages of set-controlling admixtures was comprehensively studied. New general equations were developed to alternatively determine initial and final setting times based on critical points on the curve of electrical resistivity development rate. Specifically, two critical points were detected. Point (C-1) occurred when the cement solution reached supersaturation with respect to CH during the dissolution process and the paste remained as a fluid. Point (C-2) occurred when the resistivity acceleration trend started decelerating owing to the depercolation of pores, and the paste hardened. The period from point C-1 to C-2 was defined as the solidification period, in which the setting time of the cement paste occurred approximately in the middle. The duration of the solidification period was prolonged with a retarder and shortened with an accelerator, revealing the mechanism action of admixtures and their effect on hydration and paste structure formation. According to experimental results and Powers' law, a model was proposed to estimate the solid volume fraction of cement pastes by measuring their electrical resistivity. (C) 2020 Elsevier Ltd. All rights reserved.