Abstract:The external ambient temperature plays a crucial role in influencing the hydration process of cemented paste backfill (CPB), causing notable variations in overall structure and physicalmechanical properties. To precisely analyze mechanical properties under different curing temperatures, a uniaxial compression strength (UCS) experiment was conducted. A real-time data acquisition system was established to monitor temperature, volumetric water content, and resistivity. Hydration heat measurement and low-field nuclear magnetic resonance (NMR) experiments were performed to analyze the hydration mechanism and the correlation between mechanical properties and thermal effects during the consolidation period. The study revealed that the relationship between UCS, elastic modulus, and curing temperature can be quantitatively characterized using polynomial functions. The mechanical parameters reach their peak values at a curing temperature of 40 degree celsius. However, exceeding 40 C leads to excessively rapid hydration rates, causing a decrease in hydration degree, and extremely high hydration rates result in reduced microstructure compactness. Under different curing temperature conditions, CPB exhibits substantial temperature effects in terms of volumetric water content, electrical resistivity, hydration heat, and NMR data, effectively characterizing the hydration mechanism. The hydration reaction unfolds through stages: initial induction, accelerated development, decelerated development, stable development, and hardening formation. As the curing temperature rises, the completion times of each stage exhibit a significant exponentially decreasing trend. Moreover, the application of the GA-BP neural network algorithm has unveiled inherent patterns between the monitoring results of CPB's hydration process and its macroscopic strength. Computed results show that the relative errors in predicting strength at various curing temperatures are all less than 0.1 %.

Experimental investigation on mechanical strength and microstructure of cement paste by electric curing with different voltage and frequency

A Comparative Study on the Mechanical Properties and Microstructure of Cement-Based Materials by Direct Electric Curing and Steam Curing

Achieving energy savings and early-ages strength enhancement of prefabricated cement components: Combined application of direct electric curing and sodium sulphate

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Influences of Electric Field on Composistion and Micro-structure of Cement Paste

An Overview on the Influence of Various Parameters on the Fabrication and Engineering Properties of CO2-cured Cement-Based Composites

Macroscopic and Microscopic Properties of Cement Paste with Carbon Dioxide Curing

Influence of curing conditions on mechanical properties and microstructure of magnesium potassium phosphate cement

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

SEM Analysis of the Interfacial Transition Zone between Cement-Glass Powder Paste and Aggregate of Mortar under Microwave Curing

STUDY ON DIELECTRIC PROPERTIES OF HARDENING CEMENT PASTE

Hydration Mechanism and Mechanical-Thermal Correlation of Cemented Paste Backfill under Different Curing Temperatures

Mechanical Characteristics and Macro–Microscopic Response Mechanisms of Cemented Paste Backfill under Different Curing Temperatures

Electrothermal effect of alternating current on hardening process of metakaolin-based geopolymer

Monitoring of Hydration Using the Electrical Resistance of Carbon Fiber Reinforced Cement Materials

Electric induced curing of graphene/cement-based composites for structural strength formation in deep-freeze low temperature

Influence of elevated curing temperature on the properties of cement paste and concrete at the same hydration degree

Effect of Steam Curing System on Pore Structure of Cement Paste

Electric Resistance and Curing Temperature Development of Carbon Fiber-Reinforced Conductive Concrete: A Comparative Study

Preparation of Electric- and Magnetic-Activated Water and Its Influence on the Workability and Mechanical Properties of Cement Mortar

A Micromechanical Investigation of Cement Paste Through a Combination of the X-ray Computed Tomography and the Phase Field Method