Abstract:The external ambient temperature plays a crucial role in influencing the hydration process of cemented paste backfill (CPB), causing notable variations in overall structure and physicalmechanical properties. To precisely analyze mechanical properties under different curing temperatures, a uniaxial compression strength (UCS) experiment was conducted. A real-time data acquisition system was established to monitor temperature, volumetric water content, and resistivity. Hydration heat measurement and low-field nuclear magnetic resonance (NMR) experiments were performed to analyze the hydration mechanism and the correlation between mechanical properties and thermal effects during the consolidation period. The study revealed that the relationship between UCS, elastic modulus, and curing temperature can be quantitatively characterized using polynomial functions. The mechanical parameters reach their peak values at a curing temperature of 40 degree celsius. However, exceeding 40 C leads to excessively rapid hydration rates, causing a decrease in hydration degree, and extremely high hydration rates result in reduced microstructure compactness. Under different curing temperature conditions, CPB exhibits substantial temperature effects in terms of volumetric water content, electrical resistivity, hydration heat, and NMR data, effectively characterizing the hydration mechanism. The hydration reaction unfolds through stages: initial induction, accelerated development, decelerated development, stable development, and hardening formation. As the curing temperature rises, the completion times of each stage exhibit a significant exponentially decreasing trend. Moreover, the application of the GA-BP neural network algorithm has unveiled inherent patterns between the monitoring results of CPB's hydration process and its macroscopic strength. Computed results show that the relative errors in predicting strength at various curing temperatures are all less than 0.1 %.

On the relation of setting and early-age strength development to porosity and hydration in cement-based materials

Setting Times of Early-Age Mortars Determined from Evolution Curves of Poisson's Ratio.

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Setting Times of Early-Age Mortars Determined from Evolution Curves of Poisson’s Ratio

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Correlation of Mechanical and Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Fracture Toughness And Microstructure Of Concrete At Early-Ages

A new method for predicting compressive strength of cement-based materials

Ultrasound Monitoring of Setting and Hardening Process of Ultra-High Performance Cementitious Materials

Hydration Mechanism and Mechanical-Thermal Correlation of Cemented Paste Backfill under Different Curing Temperatures

Study on pore development and water migration regularity in the process of strength formation of hydraulic concrete

Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes

Analysis of Early-Age Hydration Behavior and Micro-Mechanism of Coral Sand Cement Mortar

Influence of Porosity on Compressive and Tensile Strength of Cement Mortar

Influences of water by cement ratio on mechanical properties of mortars submitted to drying

Development of Shrinkage and Internal Moisture in Cement Paste,Mortar and Concrete at Early Age

Setting Time and Strength Monitoring of Alkali-Activated Cement Mixtures by Ultrasonic Testing

Advances in understanding hydration of Portland cement

Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT

Comparative analysis of very-early age hydration process: LC3 vs. conventional and blended cement pastes using embedded piezo sensors

Effect of Moisture Content and Porosity on Compressive Strength of Concrete During Drying at 105 °C