Abstract:Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity variations over the lifetime of infrastructure. First, the liquid density distribution at intermediate to high relative humidities is obtained using a lattice gas density functional method together with a realistic nano-granular model of cement hydrates. The calculated adsorption/desorption isotherms and pore size distributions are discussed and compare well to nitrogen and water experiments. The standard method for pore size distribution determination from desorption data is evaluated. Then, the integration of the Korteweg liquid stress field around each cement hydrate particle provided the capillary forces at the nanoscale. The cement mesoscale structure was relaxed under the action of the capillary forces. Local irreversible deformations of the cement nano-grains assembly were identified due to liquid-solid interactions. The spatial correlations of the nonaffine displacements extend to a few tens of nm. Finally, the Love-Weber method provided the homogenized liquid stress at the micronscale. The homogenization length coincided with the spatial correlation length nonaffine displacements. Our results on the solid response to capillary stress field suggest that the micronscale texture is not affected by mild drying, while local irreversible deformations still occur. These results pave the way towards understanding capillary phenomena induced stresses in heterogeneous porous media ranging from construction materials, hydrogels to living systems.

Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Ultrasonic monitoring of hydration behavior of cement paste doped with triethanolamine using novel piezoelectric ultrasonic transducer

Development of cementitious capillary crystalline waterproofing agents and durability study of concrete in the presence of chloride with sulfate in aqueous environment

Moisture Sorption Behaviour, Microstructural Changes and Macroscopic Deformation of Hardened Cement Pastes During the First Three Drying–resaturation Cycles

Morphological Effect of C–S–H Gel on the Elastic Behaviour of Early-Age Cement-Based Materials

The Effect of Water Saturation Degree on the Electrical Properties of Cement-Based Porous Material

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

A Multi-Step Scheme for Evaluating the Elastic Moduli of Partially Leached Cement Paste

Computed permeability for cement paste subject to freeze-thaw cycles at early ages

Multiscale Poromechanics of Wet Cement Paste

In-situ Μ-Xct Characterization of Cement-Waterborne Epoxy Resin Coalescence

Deformation Properties and Mechanism of Hardened Cement Pastes During Water/Oil Immersion

Determination of water permeability for cementitious materials with minimized batch effect

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement‐based materials

Pore Structure of Cement Pastes Through NAD and MIP Analysis

Investigation of the water absorption of porous aggregates from cement paste by electrical resistivity measurement

Modeling the ionic diffusion coefficient of unsaturated hardened cement paste: A micromechanical approach

Monitoring the hydration behavior of hardened cement paste affected by different environmental pH regimes