Abstract:Capillary absorption capacity has an important influence on the durability of concrete and is closely related to pore structure. In this study, the pore structure and capillary water absorption of samples were determined by low‐field nuclear magnetic resonance spectroscopy and the gravimetric method, respectively. The test results show that the most probable pore diameter and equivalent pore diameter of cement‐based materials increase with increasing water to cement ratio (w/c) and fly ash (FA) content and decrease with increasing curing age and cement to sand ratio (c/s). The porosity of cement‐based materials increases with increasing w/c and c/s, decreases with increasing curing age, and first decreases and then increases with increasing FA content. The curves for the amount of capillary water absorption per unit area in specimens with the square root of time for cement‐based material under different influence factors are similar and show obvious linear and stable stages. The capillary absorption coefficient is nearly linearly related to w/c or c/s, and nonlinearly related to curing age or FA content, observation that are well correlated with the porosity and square root of the equivalent pore radius. A modified model is proposed for the capillary absorption coefficient with consideration of the pore structure, and the theoretical results of the model are in good agreement with the test results.

Investigation of the water absorption of porous aggregates from cement paste by electrical resistivity measurement

Is Early Drying Shrinkage Still Determined by the Mesopore Content? A Case Study of Cement Paste with Minerals

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Factors Influencing the Capillary Water Absorption Characteristics of Concrete and Their Relationship to Pore Structure

Effects of pore structure and water absorption on internal curing efficiency of porous aggregates

Quantifying the Anomalous Water Absorption Behavior of Cement Mortar in View of Its Physical Sensitivity to Water

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Determination of water permeability for cementitious materials with minimized batch effect

An Experimental Study on Relationship among Water Sorptivity, Pore Characteristics, and Salt Concentration in Concrete

Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement‐based materials

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Combined experimental methods to assess absorption rate of natural and recycled aggregates

A meso-scale model toward concrete water permeability regarding aggregate permeability

Indirect Assessment of Hydraulic Diffusivity and Permeability for Unsaturated Cement-Based Material from Sorptivity

The Effect of Water Saturation Degree on the Electrical Properties of Cement-Based Porous Material

Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes

Modeling the ionic diffusion coefficient of unsaturated hardened cement paste: A micromechanical approach