Abstract:A comprehensive study was conducted to predict the elastic modulus and Poisson ratio of hardened cement pastes (HCPs), including numerical work, comparison of two modelling approaches, and experimental validation. Modelling approach 1 (M1) applied a continuum micromechanics model (CMM) whereas modelling approach 2 (M2) used finite element analysis (FEA). This study presents a reliable method for predicting the mechanical properties of HCPs by firstly employing the microstructures of HCPs, obtained by CEMHYD3D analysis with random distribution of cement particles as input parameters for both M1 and M2 approaches. The elastic modulus and Poisson ratio predicted by M1 and M2 approaches were verified through the experimental data obtained from compressive tests combined with digital image correlation analysis. The elastic moduli of HCPs were significantly affected by the input C-S-H modulus, with 90% of reported C-S-H elastic moduli falling within the range of 20.25 GPa and 30.4 GPa. The predicted elastic moduli of HCPs were well-matched with experimental data when assigning the elastic modulus, bulk modulus, and shear modulus, of C-S-H, as 20.25, 12.98, and 8.17 GPa, respectively. A sensitivity analysis demonstrated a linear increase in the elastic modulus of HCPs with increase of C-S-H modulus, with correlation coefficients R2 of 0.9985 and 0.9996 for HCPs with water-to-cement ratios (w/c) of 0.3 and 0.5, respectively. Additionally, the predicted results showed greater consistency at later age (after 7 d) compared to earlier stages. The integral absolute error values of the elastic moduli obtained via M1 and M2 for HCPs with w/c of 0.3 were 6.32% and 6.23%, respectively while those for HCPs with w/c of 0.5 were 4.8% and 5.67%, respectively. M1 approach is more recommended since it is straightforward with time and cost efficiency compared to M2 approach in addition to the suitable prediction accuracy.

Modeling the mechanical properties of cement paste:Effect of different phases

Effect of Individual Phases on Multiscale Modeling Mechanical Properties of Hardened Cement Paste

Simple Three-Step Analytical Scheme for Prediction of Elastic Moduli of Hardened Cement Paste

Unveil the Role of Nano-Caco3 in Early Shrinkage and Tensile Properties of Cement Paste: from Experimental Work to Modeling

A nano-model for micromechanics-based elasticity prediction of hardened cement paste

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Nanoindentation-based study of the microstructure and degree of hydration in hardened cement paste

Association of macroscopic laboratory testing and micromechanics modelling for the evaluation of the poroelastic parameters of a hardened cement paste

Phase Quantification in Cementitious Materials by Dynamic Modulus Mapping

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Multiscale Modeling Elastic Properties of Cement-Based Materials Considering Imperfect Interface Effect

Imperfect Interface Effect on Creep Property of Hardened-Cement Pastes: Investigations from Nano to Micro Scales

A combined SPM/NI/EDS method to quantify properties of inner and outer C-S-H in OPC and slag-blended cement pastes

The Effects of Particle Packing and Inter-particle Force on Rheological Behaviors of Binary Cement Paste

Microscale Testing and Modelling of Cement Paste as Basis for Multi-Scale Modelling

A comprehensive study on predicting the elastic modulus and Poisson ratio of hardened cement pastes via micro-scale cement hydration simulations

Diffusivity of cement paste via a continuum-based microstructure and hydration model: Influence of cement grain shape

Comparative study on mechanisms for improving mechanical properties and microstructure of cement paste modified by different types of nanomaterials

Prediction of micro creep behavior of hardened cement paste based on the isotache model of clays

Nanoindentation-based study of the micro-mechanical properties, structure, and hydration degree of slag-blended cementitious materials