Abstract:Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very challenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out. To address this robustly and accurately, an innovative approach is being developed based on in situ measurements of pastes without any sample conditioning. Data are sequentially acquired by Mo Kα1 laboratory X-ray powder diffraction (LXRPD) and microtomography (µCT), where the same volume is scanned with time to reduce variability. Wide capillaries (2 mm in diameter) are key to avoid artefacts, e.g. self-desiccation, and to have excellent particle averaging. This methodology is tested in three cement paste samples: (i) a commercial PC 52.5 R, (ii) a blend of 80 wt% of this PC and 20 wt% quartz, to simulate an addition of supplementary cementitious materials, and (iii) a blend of 80 wt% PC and 20 wt% limestone, to simulate a limestone Portland cement. LXRPD data are acquired at 3 h and 1, 3, 7 and 28 days, and µCT data are collected at 12 h and 1, 3, 7 and 28 days. Later age data can also be easily acquired. In this methodology, the amounts of the crystalline phases are directly obtained from Rietveld analysis and the amorphous phase contents are obtained from mass-balance calculations. From the µCT study, and within the attained spatial resolution, three components (porosity, hydrated products and unhydrated cement particles) are determined. The analyses quantitatively demonstrate the filler effect of quartz and limestone in the hydration of alite and the calcium aluminate phases. Further hydration details are discussed.

A combined SPM/NI/EDS method to quantify properties of inner and outer C-S-H in OPC and slag-blended cement pastes

Phase Quantification in Cementitious Materials by Dynamic Modulus Mapping

Critical Aspects of Scanning Probe Microscopy Mapping when Applied to Cement Pastes

Nanoindentation Characteristics of Cementitious Materials Containing Lithium Slag

Nanoindentation-based study of the microstructure and degree of hydration in hardened cement paste

Nanoindentation-based study of the micro-mechanical properties, structure, and hydration degree of slag-blended cementitious materials

NMR, XRD, IR and synchrotron NEXAFS spectroscopic studies of OPC and OPC/slag cement paste hydrates

Simple Three-Step Analytical Scheme for Prediction of Elastic Moduli of Hardened Cement Paste

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Insights into the microstructure and mechanical properties evolution of hydration products in cementitious materials incorporating GGBFS

Modeling the mechanical properties of cement paste:Effect of different phases

Effect of Individual Phases on Multiscale Modeling Mechanical Properties of Hardened Cement Paste

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Microscopic phase identification of cement-stabilized clay by nanoindentation and statistical analytics

Application of X-Ray Micro-CT for Quantifying Degree of Hydration of Slag-Blended Cement Paste

Critical strain measurements of hydrating Portland cement pastes: A new understanding of microstructure development

Comparative analysis of very-early age hydration process: LC3 vs. conventional and blended cement pastes using embedded piezo sensors

Investigation of spatial nano-structure development of the hardened C3S pastes by serial block-face SEM

Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies

Non-Destructive Monitoring of Hydration Characteristics in Alternative Materials and Seawater-Based Cementitious Pastes Using Electrochemical Impedance Spectroscopy

A comprehensive study on predicting the elastic modulus and Poisson ratio of hardened cement pastes via micro-scale cement hydration simulations