Abstract:Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very challenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out. To address this robustly and accurately, an innovative approach is being developed based on in situ measurements of pastes without any sample conditioning. Data are sequentially acquired by Mo Kα1 laboratory X-ray powder diffraction (LXRPD) and microtomography (µCT), where the same volume is scanned with time to reduce variability. Wide capillaries (2 mm in diameter) are key to avoid artefacts, e.g. self-desiccation, and to have excellent particle averaging. This methodology is tested in three cement paste samples: (i) a commercial PC 52.5 R, (ii) a blend of 80 wt% of this PC and 20 wt% quartz, to simulate an addition of supplementary cementitious materials, and (iii) a blend of 80 wt% PC and 20 wt% limestone, to simulate a limestone Portland cement. LXRPD data are acquired at 3 h and 1, 3, 7 and 28 days, and µCT data are collected at 12 h and 1, 3, 7 and 28 days. Later age data can also be easily acquired. In this methodology, the amounts of the crystalline phases are directly obtained from Rietveld analysis and the amorphous phase contents are obtained from mass-balance calculations. From the µCT study, and within the attained spatial resolution, three components (porosity, hydrated products and unhydrated cement particles) are determined. The analyses quantitatively demonstrate the filler effect of quartz and limestone in the hydration of alite and the calcium aluminate phases. Further hydration details are discussed.

Application of X-Ray Micro-CT for Quantifying Degree of Hydration of Slag-Blended Cement Paste

Nanoindentation-based study of the micro-mechanical properties, structure, and hydration degree of slag-blended cementitious materials

Nanoindentation-based study of the microstructure and degree of hydration in hardened cement paste

Capillary Imbibition of Ethanol in Cement Paste Traced by X-ray Computed Tomography with CsCl-enhancing Technique

Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies

Quantitative In-situ Analysis of Water Transport in Concrete Completed Using X-ray Computed Tomography

NMR, XRD, IR and synchrotron NEXAFS spectroscopic studies of OPC and OPC/slag cement paste hydrates

A combined SPM/NI/EDS method to quantify properties of inner and outer C-S-H in OPC and slag-blended cement pastes

Application of point-counting and gray-threshold methods in quantitatively calculating the hydration degree of polymer-modified cement

Phase Quantification in Cementitious Materials by Dynamic Modulus Mapping

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Advancing Concrete Durability Research through X-ray Computed Tomography

Insights into the microstructure and mechanical properties evolution of hydration products in cementitious materials incorporating GGBFS

Hydration and Fractal Analysis on Low-Heat Portland Cement Pastes Using Thermodynamics-Based Methods

Research Progress on Cement-Based Materials by X-ray Computed Tomography

Image enhancement and microstructure characterization of energy dispersive X-ray spectroscopy images of blended cement pastes

Investigations on the rehydration of recycled blended SCMs cement

Calorimetric Study of Calcium Aluminate Cement Blended with Flue Gas Desulfurization Gypsum

Study on Hydration Degree of Portland Cement-Slag Complex Binders

The pore structure and water absorption in Portland/slag blended hardened cement paste determined by synchrotron X-ray microtomography and neutron radiography

Critical Aspects of Scanning Probe Microscopy Mapping when Applied to Cement Pastes