Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A K-Band Frequency Tripler Using Transformer-Based Self-Mixing Topology with Peaking Inductor

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

A 91.9-113.2 GHz Compact Frequency Tripler with 44.6 dBc Peak Fundamental Harmonic-Rejection-Ratio Using Embedded Notch-filters and Area-Efficient Matching Network in 65 nm CMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Design of W-Band Tripler

Design of High Power Tripler Based on On-Chip Schottky Diodes

A 170‐ to 260‐GHz Full‐Band Frequency Doubler Realized by Impedance Compression Matching Technique

A 315–345 GHz quad‐port balanced tripler with inherent suppressions on even‐order harmonics using discrete Schottky diodes

Design of a 500 GHz Frequency Tripler with a Probe-based Idle Harmonic Control Technique

Design of a Dual-Band Injection Locked Frequency Tripler with Sixth-Order Transformer-Based LC Tank

A Wide Locking Range and Low Dc Power Injection-Locked Frequency Tripler for K-Band Application

A 24.9~34.5 GHz Injection-Locked Frequency Tripler Based on Top Differential Injection of Resonator

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS

24.3 A 200-to-350ghz SiGe BiCMOS Frequency Doubler with Slotline-Based Mode-Decoupling Harmonic-Tuning Technique Achieving 1.1-to-4.7dbm Output Power

A Novel Balanced Frequency Tripler With Improved Power Capacity for Submillimeter-Wave Application

A Compact 24.5–32.6 GHz CMOS Frequency Doubler Based On Coupled Inductor

Design of A Microwave Frequency Tripler with Conversion Gain

A 26-38GHz Ultra-Wideband Balanced Frequency Doubler in 0.15µ m GaAs pHEMT Process