Abstract:In this paper, a new terahertz solid-state frequency doubler design method named function-based harmonic impedance optimization method (FHIOM) is reported to improve the simulation iteration speed and accuracy of terahertz solid-state circuit design. Obtaining the matching impedance of the diode part in the optimal operating condition and realizing this impedance through the input-output matching structure are the two main steps in the design of the terahertz doubler. In this design method, harmonic impedance optimization and function-based impedance optimization are applied to quickly obtain the best input and output embedded impedance of the broadband frequency doubler device, which reduces the blindness of tentative optimization. This method innovatively estimates the impedance of the matching structure through the formula, which strengthens the connection between impedance optimization and matching structure realization. Based on the function-based harmonic impedance optimization method, a 220 GHz doubler is designed, processed, and measured. Measured results show that the doubler exhibits a bandwidth from 212 GHz to 230 GHz, with a conversion efficiency of above 15.0% a mean output power of 9.12 mW when supplied with up to 32 mW of input power. A 16 mW peak output power with a 16.4% efficiency was measured at 228 GHz when the input power was 97.55 mW. The frequency doubler design method presented in this work has the advantages of high efficiency and accuracy, which makes it very attractive for practical broadband terahertz applications.

Design of a 500 GHz Frequency Tripler with a Probe-based Idle Harmonic Control Technique

A 91.9-113.2 GHz Compact Frequency Tripler with 44.6 dBc Peak Fundamental Harmonic-Rejection-Ratio Using Embedded Notch-filters and Area-Efficient Matching Network in 65 nm CMOS

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Design of A Microwave Frequency Tripler with Conversion Gain

Design of High Power Tripler Based on On-Chip Schottky Diodes

A 315–345 GHz quad‐port balanced tripler with inherent suppressions on even‐order harmonics using discrete Schottky diodes

A K-Band Frequency Tripler Using Transformer-Based Self-Mixing Topology with Peaking Inductor

Full Waveguide Matching Design for 220 GHz Frequency Doubler

An 81–99 GHz Tripler with Fundamental Cancellation and 3rd Harmonic Enhancement Technique in 40-Nm CMOS

A 220 GHz High-Efficiency Doubler Based on Function-Based Harmonic Impedance Optimization Method

Design of a 225ghz Frequency Broadband Solid State Tripler

A 220 GHz Frequency Tripler Based on AlN Substrate

A Waveguide Reconfigurable Multiband Terahertz Frequency Doubler Using Choke Flange Technology

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

A Terahertz Frequency Tripler with Single Serial Varactor Diode

Design of W-Band Tripler

Four‐hundred Gigahertz Broadband Multi‐branch Waveguide Coupler

24.3 A 200-to-350ghz SiGe BiCMOS Frequency Doubler with Slotline-Based Mode-Decoupling Harmonic-Tuning Technique Achieving 1.1-to-4.7dbm Output Power

A 200ghz 5-Branch Waveguide Hybrid Coupler

A 135–150-Ghz Frequency Tripler with Waveguide Filter Matching

A 400 GHz Broadband Multi-Branch Waveguide Coupler