Abstract:In order to improve the oxidation resistance of silicide coatings on Nb silicide based alloys, Y-modified silicide coatings were prepared by co-depositing Si and Y at 1050, 1150 and 1250°C for 5–20h, respectively. It has been found that the coatings prepared by co-depositing Si and Y at 1050 and 1150°C for 5–20h as well as at 1250°C for 5h were composed of a thick (Nb,X)Si2 (X represents Ti, Cr and Hf elements) outer layer and a thin (Nb,X)5Si3 inner layer, while the coatings prepared by co-depositing Si and Y at 1250°C for 10–20h possessed a thin outer layer composed of (Ti,Nb)5Si3 and Ti-based solid solution, a thick (Nb,X)Si2 intermediate layer and a thin (Nb,X)5Si3 inner layer. EDS analyses revealed that the content of Y in the (Nb,X)Si2 layers of all the coatings was about 0.34–0.58at.% while that in the outer layers of the coatings prepared by co-depositing Si and Y at 1250°C for 10–20h was about 1.39–1.88at.%. The specimens treated by co-depositing Si and Y at 1250°C for 10h were selected for oxidation test. The oxidation behavior of the coating specimens at 1250°C indicated that the Si–Y co-deposition coating had better oxidation resistance than the simple siliconized coating because the oxidation rate constant of the Si–Y co-deposition coating was lower than that of the simple siliconized coating by about 31%. The scale developing on the Si–Y co-deposition coating consisted of a thicker outer layer composed of SiO2 and TiO2 and a thinner SiO2 inner layer.

Synthesis WSi2 Coating on W Substrate by HDS Method with Various Deposition Times

Synthesis and Charaterization of Silicon-Substituted Hydroxyapatite Coating by Electrochemical Deposition on Ti Substrate

Effect of Hot Dip Silicon-Plating Temperature on Microstructure Characteristics of Silicide Coating on Tungsten Substrate

Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate

Investigation of Morphology and Texture Properties of WSi2 Coatings on W Substrate Based on Contact-Mode AFM and EBSD

Effect of Y_2O_3 on Microstructure of Silicide Coatings on Nb-silicide-based Ultrahigh Temperature Alloy

Effects of Y 2 O 3 /Y on Si-B Co-Deposition Coating Prepared Through HAPC Method on Pure Molybdenum

Microstructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al Alloy

Structure Formation of Si-Y_2O_3 Co-Deposition Coatings on Nb-silicide-based Alloy

Substrate dilution and interface structures of tungsten coating deposited by double-glow plasma surface alloying on stainless steel substrate

Microstructure of Si-Y Co-Deposition Coating Prepared on A Nb-Based Ultrahigh Temperature Alloy by Pack Cementation Process

Structure and oxidation behavior of Si–Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique

Si-B Co-Deposition Coatings on an Nb Silicide Based Ultrahigh Temperature Alloy Prepared by Pack Cementation Technique

Fabrication and Growth Mechanism of Al-Si Coatings Deposited on Mo Substrate by Hot Dip Plating Technology

Characteristics of tungsten coating on silicon particles prepared by sol-gel method

An Oxidation and Ablation Protective WSi2-HfB2-SiC Coating for SiC Coated C/C Composites at 1973 K and Above

Synthesis of Si-NbSi 2 Coatings on Nb Substrate by Hot Dip Silicon-Plating Method under the Various Deposition Temperatures

Structure Formation of Co-Deposition of Si and Al Coatings on Advanced Nb-based Ultrahigh Temperature Alloy by Pack Cementation Process

The Influence of Substrate Doping on Silicide Formation with Tungsten Deposited from Tungsten Hexafluoride

Design and Synthesis of Diffusion-Modified HfC/HfCSiC Bilayer System Onto WC-Co Substrate for Adherent Diamond Deposition