Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

A 0.025-Mm 2 0.8-V 78.5-Db SNDR VCO-Based Sensor Readout Circuit in a Hybrid PLL- $\delta\sigma$ M Structure

A 0.025-mm<sup>2</sup> 0.8-V 78.5dB-SNDR VCO-Based Sensor Readout Circuit in a Hybrid PLL-ΔΣM Structure

A 0.025mm(2) 0.8v 78.5db-Sndr Vco-Based Sensor Readout Circuit In A Hybrid Pll-Delta Sigma M Structure

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A 0.8 V Low Power Low Phase-Noise Pll

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A 1.2 mW 67.5 dB SQDR VCO-based ΣΔ ADC with Non-linearity Cancellation Technique

A Second-Order Purely VCO-Based CT $\delta\sigma$ ADC Using a Modified DPLL Structure in 40-Nm CMOS

A 78.6 Db-Sndr 520Mvpp-Full-scale 620Mω-Zin 105dbcmrr VCO-based Sensor Readout Circuit Using FVF-Based Gm-Input Structure

An 81.5Db-Dr 1.25Mhz-Bw VCO-Based CT ΔΣ ADC with Double-PFD Quantizer

A 74.5-dB Dynamic Range 10-MHz BW CT-ΔΣ ADC With Distributed-Input VCO and Embedded Capacitive- π Network in 40-nm CMOS

A 1.8mW 2MHz-BW 66.5dB-SNDR ΔΣ ADC using VCO-based integrators with intrinsic CLA

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A 0.001-Mm$$^{2}$$ 112.32-$$\Upmu $$W All-Digital PLL with Dual-Tuned DCO and Dual-Tuned Control Algorithm

A 0.6V 50-to-145mhz PVT Tolerant Digital PLL with DCO-dedicated ΔΣ LDO and Temperature Compensation Circuits in 65nm CMOS

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

An 80.2-to-89.1dB-SNDR 24k-to-200kHz-BW VCO-Based Synthesized ?S ADC with 105dB SFDR in 28-nm CMOS

A 10MHz-BW, 5.6mW, 70dB SNDR ΔΣ ADC using VCO-based integrators with intrinsic DEM

A Dual-Path Subsampling PLL With Ring VCO Phase Noise Suppression

A 174.3-Db FoM VCO-Based CT $\delta \sigma $ Modulator with a Fully-Digital Phase Extended Quantizer and Tri-Level Resistor DAC in 130-Nm CMOS