Abstract:Low-voltage clock generation and modulation are important to have dynamic voltage scaling for low-power SoC design or to enable the chip to be directly powered by energy harvesters for IoT applications. Even though the supply voltage of an integer-N PLL has reached 0.4V [1], designing a robust fractional-N PLL under 0.5V is still challenging as both a high-performance phase detector (PD) and an effective ΔΣ quantization noise (Q-noise) reduction method are required at low voltage. As shown at the top of Fig. 14.7.1, the time resolution of a DTC is severely degraded as supply voltage decreases, and the use of a circuit’s intrinsic time delay as reference base is not stable over PVT variations. Even though voltage-domain compensation methods [2, 3] achieve lower noise and better linearity, they must first convert the phase error from the time domain to the voltage domain, which causes nonlinearity issues and consumes significant voltage headroom for ultra-low-voltage (ULV) operations. To the best of authors’ knowledge, the lowest supply voltage for a published fractional-N PLL is 0.5V, but it uses an on-chip voltage booster to supply a higher internal voltage for the TDC [4] or must use large decoupling capacitors for the TDC in product-level designs. Given the fact that the use of a large decoupling capacitor with supply regulation is required in practice to achieve robust in-band noise performance, a time-interleaving flip-flop phase detector (TI-FFPD) has been proposed as an efficient PD structure, which achieves high linearity and low reference spur for a ring-VCO-based integer-N PLL [5]. By leveraging the advantage of the TI-FFPD, this paper presents a sub-0.5V bias-current-free fractional-N PLL with a calibration-free voltage-mode phase interpolator (VPI) for Q-noise cancellation, achieving sub-600fs rms jitter and <-57dBc worse-case fractional spur at 2.4GHz output.

A 0.6V 50-to-145mhz PVT Tolerant Digital PLL with DCO-dedicated ΔΣ LDO and Temperature Compensation Circuits in 65nm CMOS

A 0.8 V Low Power Low Phase-Noise Pll

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A 0.55V 100mhz ADPLL with ΔΣ LDO and Relaxation DCO in 65nm CMOS

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

A Low-Power RF CMOS Charge Pump PLL

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

A 0.6/1.2-V 14.1-Mw 96.8Ghz-to-108.5ghz Transformer-Based Pll with Embedded Phase Shifter in 65-Nm Cmos

A CMOS digital-controlled oscillator for All-digital PLL frequency synthesizer

A 0.8-V, 2.55-Ghz, 2.62-Mw Charge-Pump PLL with High Spectrum Purity

14.7 A 0.45V 0.72mw 2.4ghz Bias-Current-Free Fractional-N Hybrid PLL Using a Voltage-Mode Phase Interpolator in 28nm CMOS

A 400uw 3.6Ghz-4.6Ghz Low Power Cryogenic CP-PLL with Transformer-Based VCO in 28nm Bulk CMOS

A 0.0048mm2 0.43-to-1.0v 0.54-to-1.76ghz Bias-Current-Free PLL in 14nm FinFET CMOS

A 2.1-GHz PLL with -80dBc/-74dBc reference spur based on aperture-phase detector and phase-to-analog converter

A Sub-mW Fractional-<inline-formula> &Lt;tex-Math Notation="latex">${n}$ &Lt;/tex-Math> &Lt;/inline-Formula> ADPLL with FOM of −246 Db for IoT Applications

A 0.022mm2 970µw Dual-Loop Injection-Locked PLL with −243db FOM Using Synthesizable All-Digital PVT Calibration Circuits

A 1.75 mW 1.1 GHz semi-digital fractional-N PLL with TDC-less hybrid loop control

A 265-$\Mu$ W Fractional-${N}$ Digital PLL with Seamless Automatic Switching Sub-Sampling/Sampling Feedback Path and Duty-Cycled Frequency-Locked Loop in 65-Nm CMOS

A Low Power All-Digital PLL with −40dbc In-Band Fractional Spur Suppression for NB-IoT Applications

A 0.98mw Fractional-N ADPLL Using 10b Isolated Constant-Slope DTC with FOM of −246db for IoT Applications in 65nm CMOS