Abstract:Shorter technology enable us to create higher speed oscillators which can provide better resolution in time domain. Therefore, a simple ADC using voltage (or current) controlled oscillator (VCO) and a counter can be implemented using this approach. Conceptually, the operation order in this ADC is similar to a conventional ΣΔ modulator. The CCO integrates frequency to produce output in the form of phase. And the number of stages in the CCO determines the quantization levels (or phase resolution). The difference of quantized phase output produces a frequency proportional to the input signal. Therefore, unlike, a conventional ΣΔ modulator no feedback is required for a first order noise shaping. In order to achieve a low power for moderate performance two key techniques have been used: a) a cross-coupled voltage to current (V/I) converter to achieve non-linearity cancellation (mainly 3rd-order harmonic), and b) a stack structure to share current between V/I converter and CCO to reduce power. This ADC has been simulated using models of typical 130nm CMOS technology. In SPICE simulation, SQDR/SFDR of 67.5 dB/71 dB is achieved over a total signal bandwidth of 5 MHz for an input swing of 300mV (Vpp) for typical corner at room temperature. The analog blocks consumed a total of 96.5μW from a regulated 1.2V supply, whereas, the digital blocks consumed an estimated power of 1.1 mW. Since, the major circuit blocks are digital in nature, the presented circuit is highly amenable with technology scaling.

An 80.2-to-89.1dB-SNDR 24k-to-200kHz-BW VCO-Based Synthesized ?S ADC with 105dB SFDR in 28-nm CMOS

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A Synthesizable 0.0060mm2 VCO-Based Delta Sigma Modulator with Digital Tri-level Feedback Scheme.

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

A 60-Fj/step 11-ENOB VCO-based CTDSM Synthesized from Digital Standard Cell Library.

A 1.2 mW 67.5 dB SQDR VCO-based ΣΔ ADC with Non-linearity Cancellation Technique

A 1.8mW 2MHz-BW 66.5dB-SNDR ΔΣ ADC using VCO-based integrators with intrinsic CLA

A Scaling Compatible, Synthesis Friendly VCO-based Delta-Sigma ADC Design and Synthesis Methodology

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

A Second-Order Purely VCO-Based CT $\delta\sigma$ ADC Using a Modified DPLL Structure in 40-Nm CMOS

A Power Scalable PLL Frequency Synthesizer for High-Speed Δ—Σ ADC

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers

A 10-Bit 5 MS/s VCO-SAR ADC in 0.18-&Lt;inline-formula> &Lt;tex-Math Notation="latex">$\mu$ &Lt;/tex-Math> &Lt;/inline-Formula>m CMOS

A 65.5-Db SNDR 8.1–11.1-Nw ECG SAR ADC with Adaptive-Latching OSC-Based Comparator and DAC Calibration

A 10-Bit 20-Ms/s SAR DAC Achieving 57.9-Db SNDR Using Insensitive Geometry DAC Array.

An 81.5Db-Dr 1.25Mhz-Bw VCO-Based CT ΔΣ ADC with Double-PFD Quantizer

A 5 MHz-BW 71.7-Db SNDR Two-Step Hybrid-Domain ADC in 65-Nm CMOS

A 16-Bit 18-MSPS SAR ADC with Hybrid Synchronous and Asynchronous Control Logic

A 120-MHz BW, 122-dBFS SFDR CT$\Delta \Sigma$ ADC With a Multi-Path Multi-Frequency Chopping Scheme