Abstract:Shorter technology enable us to create higher speed oscillators which can provide better resolution in time domain. Therefore, a simple ADC using voltage (or current) controlled oscillator (VCO) and a counter can be implemented using this approach. Conceptually, the operation order in this ADC is similar to a conventional ΣΔ modulator. The CCO integrates frequency to produce output in the form of phase. And the number of stages in the CCO determines the quantization levels (or phase resolution). The difference of quantized phase output produces a frequency proportional to the input signal. Therefore, unlike, a conventional ΣΔ modulator no feedback is required for a first order noise shaping. In order to achieve a low power for moderate performance two key techniques have been used: a) a cross-coupled voltage to current (V/I) converter to achieve non-linearity cancellation (mainly 3rd-order harmonic), and b) a stack structure to share current between V/I converter and CCO to reduce power. This ADC has been simulated using models of typical 130nm CMOS technology. In SPICE simulation, SQDR/SFDR of 67.5 dB/71 dB is achieved over a total signal bandwidth of 5 MHz for an input swing of 300mV (Vpp) for typical corner at room temperature. The analog blocks consumed a total of 96.5μW from a regulated 1.2V supply, whereas, the digital blocks consumed an estimated power of 1.1 mW. Since, the major circuit blocks are digital in nature, the presented circuit is highly amenable with technology scaling.

A 0.025-mm<sup>2</sup> 0.8-V 78.5dB-SNDR VCO-Based Sensor Readout Circuit in a Hybrid PLL-ΔΣM Structure

A 0.025-Mm 2 0.8-V 78.5-Db SNDR VCO-Based Sensor Readout Circuit in a Hybrid PLL- $\delta\sigma$ M Structure

A 0.025mm(2) 0.8v 78.5db-Sndr Vco-Based Sensor Readout Circuit In A Hybrid Pll-Delta Sigma M Structure

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A 0.8 V Low Power Low Phase-Noise Pll

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 78.6 Db-Sndr 520Mvpp-Full-scale 620Mω-Zin 105dbcmrr VCO-based Sensor Readout Circuit Using FVF-Based Gm-Input Structure

A 1.2 mW 67.5 dB SQDR VCO-based ΣΔ ADC with Non-linearity Cancellation Technique

A Second-Order Purely VCO-Based CT $\delta\sigma$ ADC Using a Modified DPLL Structure in 40-Nm CMOS

A 74.5-dB Dynamic Range 10-MHz BW CT-ΔΣ ADC With Distributed-Input VCO and Embedded Capacitive- π Network in 40-nm CMOS

An 81.5Db-Dr 1.25Mhz-Bw VCO-Based CT ΔΣ ADC with Double-PFD Quantizer

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

A 1.8mW 2MHz-BW 66.5dB-SNDR ΔΣ ADC using VCO-based integrators with intrinsic CLA

A 0.6V 50-to-145mhz PVT Tolerant Digital PLL with DCO-dedicated ΔΣ LDO and Temperature Compensation Circuits in 65nm CMOS

A Continuously Tunable Hybrid LC-VCO PLL With Mixed-Mode Dual-Path Control and Bi-levelModulated Coarse Tuning

A VCO Based Continuous Time Delta Sigma ADC with 10mhz BW 55db SNR and 42db SNDR

A 10MHz-BW, 5.6mW, 70dB SNDR ΔΣ ADC using VCO-based integrators with intrinsic DEM

An 80.2-to-89.1dB-SNDR 24k-to-200kHz-BW VCO-Based Synthesized ?S ADC with 105dB SFDR in 28-nm CMOS

A 0.001-Mm$$^{2}$$ 112.32-$$\Upmu $$W All-Digital PLL with Dual-Tuned DCO and Dual-Tuned Control Algorithm

A Continuously Tunable Hybrid Lc-Vco Pll with Mixed-Mode Dual-Path Control and Bi-Level Delta-Sigma Modulated Coarse Tuning