Accurate density measurement of a small solid sample using a combination of hydrostatic weighing and pressure-of-flotation methods

Kanako Nishihashi,Atsushi Waseda,Yohan Kondo,Youichi Bitou,Naoki Kuramoto

DOI: https://doi.org/10.1088/1681-7575/ad9837

2024-11-29

Metrologia

Abstract:A new high-precision density measurement method for small non-silicon samples was developed. Hydrostatic weighing (HW) and the pressure-of-flotation method (PFM) are high-precision techniques for determination solid sample densities. However, in HW, the uncertainty of the density measurement is quite large when the volume of the sample is much smaller than that of a 1 kg silicon sample owing to the uncertainty of the auxiliary weights during the measurement. Additionally, the PFM is not applicable for measuring the density of non-silicon materials. We developed a new method that combines HW and the PFM. We prepared a small 45 g Si 3 N 4 sphere sample with a diameter of 30 mm. By employing two silicon discs with these masses that were nearly equivalent to the apparent masses of the sample, the same auxiliary weights were used for both the standards and the sample. The new method was validated by measuring the density of the 45 g Si 3 N 4 sphere with a relative standard uncertainty of 4.6 × 10 −6 , which is significantly lower than that obtained by traditional HW methods. This approach demonstrates substantial improvements in the precision of small-sample density measurements, thus offering a robust alternative to conventional techniques.

instruments & instrumentation,physics, applied