Abstract:Metal additive manufacturing (AM) enables customizable, on-demand parts, allowing for new designs and improved engineering performance. Yet, the ability to control AM metal alloy microstructures (i.e., grain morphology, crystallographic texture, and phase content) is lacking. This work performs corroborative neutron diffraction and large-scale electron backscatter diffraction (EBSD) measurements to assess crystallographic texture in electron beam melted (EBM) Ti-6Al-4V as a function of scan strategy and build height. Texture components for one raster and two spot melt scan strategies were evaluated using a triclinic specimen symmetry to capture all possible texture components, which were found to be considerably different than previously reported values from studies employing orthotropic specimen symmetry. This finding highlights the importance of a standard method and best practice for assessing textures produced by AM. Texture was found to vary between scan strategies, but changed minimally as a function of build height. Parent phase β-Ti reconstructions obtained from as-built crystallographic orientations revealed spot melt scan strategies produced finer equiaxed/columnar grains with clear 001 β build direction fiber textures, whereas the raster scan strategy produced large columnar grains and a weaker 001 β build direction fiber texture. The observed grain morphologies agree with those predicted by solidification theory for the thermal gradients and solidification velocities experienced during the build process. The presence of a strong 001 β fiber orientation (typical of cubic solidification) produced by spot melting was found to correlate with a previously unreported 01 1 ¯ 2 α fiber texture in the as-built condition and colony microstructures. The 01 1 ¯ 2 α fiber texture was weakly observed for the raster scan strategy, and 001 β oriented grains preferentially transformed into α' martensite with orientations between 1 1 ¯ 00 α and 11 2 ¯ 0 α . This shift in product α-Ti orientations has not yet been reported, and further work is recommended to understand these crystallographic signatures in the context of solid-state phase transformations. The presence of the 01 1 ¯ 2 α fiber texture is proposed as a useful diagnostic for evaluating the solidification or transformed microstructure condition (e.g., grain morphology and texture) of Ti-6Al-4V AM builds via accessible techniques like laboratory X-ray diffraction.

Factor which governs the feature of texture developed during additive manufacturing; clarified from the study on hexagonal C40-NbSi2

Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V

Formation Mechanism of Cube Texture Components ({001}<100>) Associated with Dynamic Recrystallization During Compression in the Single BCC Phase Region of Ti-22Al-25Nb Alloy

Formation mechanism of Cube texture components ({001} ) associated with dynamic recrystallization during compression in the single BCC phase region of Ti-22Al-25Nb alloy

Effect of Dynamic Recrystallization Mode on Texture Components and Hardness for Nano-SiC Particles Reinforced Aluminum Matrix Composites Prepared Via Friction Stir Processing

Stability of crystallographic texture in laser powder bed fusion: Understanding the competition of crystal growth using a single crystalline seed

Towards 3-D texture control in a β titanium alloy via laser powder bed fusion and its implications on mechanical properties

Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy

Textures formed in a CoCrMo alloy by selective laser melting

A quantitative study on mechanical behavior of Mg alloys with bimodal texture components

Textures of Rectangular Extrusions and Their Effects on the Mechanical Properties of Thermo-Mechanically Treated, Lamellar Microstructure, Ti–47Al–2Cr–2Nb–0.15B

Property Improvement of Additively Manufactured Ti64 by Heat Treatment Characterized by In Situ High Temperature EBSD and Neutron Diffraction

Anomalous texture development induced by grain yielding anisotropy in Ni and Ni-Mo alloys

Considering interplay between multiple physical phenomena to elucidate single crystal-like texture, phase transformations, and mechanical behavior of directed energy deposited SS316L

The Evolution of Cube Texture in Directionally Solidified Fe-3.0 wt. % Si Alloy Assisted by a High Static Magnetic Field

Enhancement of {110} Texture by Controlling α‐phase and Achievement of Low Young's Modulus and High Strength in Metastable β‐type Ti–Zr‐Based Alloys

Appearance of textures with a c-axis parallel to the extrusion direction in Mg alloys

Part geometry-driven crystallographic texture control in a 3D-printed austenitic steel – a strategy for near-monocrystalline microstructure generation

Shape memory and mechanical properties of a Fe-Mn-Si-based shape memory alloy: Effect of crystallographic texture generated during additive manufacturing

Microstructure and texture evolution during the manufacturing of in situ TiC-NiCr cermet through selective laser melting process

Effect of Scanning Angle on Grain Growth and Mechanical Properties of Ni10cr6w1fe9ti1 Hea