Abstract:In the laser powder bed fusion (LPBF), the grains grow in preferential directions depending on the scanning strategies, which results in layer-by-layer builds of particular crystallographic textures. The unique microstructure formed by LPBF results in anisotropic properties of the built structure at both macro and micro levels. To understand the grain deformation of the textured alloy fabricated by LPBF in the high-strain-rate shear process, Alloy 718 was used as an example in this work. Bulk samples with different metallurgical textures were deliberately fabricated by LPBF via three laser rotation angles, namely 0°, 67° and 90°, and then four thin slices obtained from bulks were subjected to "quasi-in-situ" grain deformation investigation through orthogonal cutting (a simple shear loading condition). The evolution of crystal orientations and morphologies, including size and shape, were traced before and after shear deformation. A full-field crystal plasticity simulation was used to quantify the stress status for grains obtained from EBSD data. This for the first time reveals the crystallographic level deformation history for hundreds of microns during a high strain rate shear removal deformation. Due to the carefully retained deformation history (i.e., typical bulges and slip bands) on the surface, a repeated deformation pattern was observed, attributing to the non-homogeneous deformation of typical build-directional blocks. The most active slip trace of deformed grain was calculated and verified based on the dominated slip bands within individual grains. The slip trace direction and intensity were quantified for different textured Alloy 718. Since the slipping-based deformation for an orientated grain is represented by its most active slip trace, a deformation tendency map is obtained by combining the shear direction, slip system and grain morphology. It reveals that grains in high texture intensity workpieces generally follow the macro shear-based deformation, while with the decrease in texture intensity, the plastic anisotropy is significant at the grain scale. Grains with similar orientations may also result in localised deformation anisotropy due to the different morphologies.

Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy

Novel strengthening mechanism of laser powder bed fusion-manufactured Inconel 718: Effects of customized hierarchical interfaces

Crystal Plasticity Quantification of Anisotropic Tensile and Fatigue Properties in Laser Powder Bed Fused Inconel 718 Superalloy

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Dislocation distribution, crystallographic texture evolution and plastic inhomogeneity of Inconel 718 fabricated by laser powder-bed fusion

Microstructure and mechanical property comparison of Inconel alloys fabricated using micro and conventional laser powder bed fusion

Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties

The evolution of microstructure and mechanical properties of Inconel 625 alloy fabricated by laser powder bed fusion via novel hybrid scanning strategy

Towards 3-D texture control in a β titanium alloy via laser powder bed fusion and its implications on mechanical properties

Grain morphology and mechanical properties tailoring of Inconel 625 alloy fabricated by laser powder bed fusion

Tailored microstructure by using in-situ re-scanning and its influence on fatigue crack growth behavior of Inconel 718 fabricated by LPBF at elevated temperature

Texture-based residual stress analysis of laser powder bed fused Inconel 718 parts

Heterogeneous structures in a Ni-based superalloy with tailoring mechanical properties produced by a twin laser powder bed fusion system

Texture tailored through combination of molten pool morphology and scanning path in laser additive manufacturing of alloy 718

Outstanding strength-ductility synergy in Inconel 718 superalloy via laser powder bed fusion and thermomechanical treatment

Anisotropic Tensile Behavior of in Situ Precipitation Strengthened Inconel 718 Fabricated by Additive Manufacturing

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion

In-Situ Tailoring Microstructures to Promote Strength-Ductility Synergy in Laser Powder Bed Fusion of Nicocr Medium-Entropy Alloy

Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion

Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718