Abstract:The characterization of Ni-based superalloy Inconel® 718 fabricated by powder-based laser fusion process was performed to study microstructural evolution and accompanying mechanical properties of as-deposited and post-heat-treated material. The current effort employs a low laser volumetric energy density during the deposition. X-ray diffraction, optical, and scanning electron microscopy were done for microstructural characterization. Examination of hardness values, tensile properties, and fractography based on sample orientation was also performed. X-ray diffraction studies facilitated qualitative confirmation of as-deposited samples possessing cube texture. The optical and scanning electron micrographs aided in examining the evolution of microscopic features after each post-processing stage. The as-deposited material possessed columnar grain morphology along with melt-pool marks, which on further magnification showed cellular-dendritic sub-grains along with Laves phases in the interdendritic grain boundaries. Solution heat treatment resulted in reducing these detrimental Laves phases and relief of thermal residual stresses caused by non-homogeneous recrystallization. Solution treatment also led to the formation of equiaxed grain clusters at various sample locations along with the existing columnar grains. The incoherent δ phase was formed at the grain boundaries along with coherent γ ′′ precipitates. The mechanical properties of as-deposited Inconel 718 alloy were near-isotropic in specimens oriented parallel and perpendicular to the build direction which is ascribed to low laser volumetric energy density. Micrographs of fractured surfaces taken for both directions of all sample conditions showed a ductile mode of fracture.

Grain morphology and mechanical properties tailoring of Inconel 625 alloy fabricated by laser powder bed fusion

The evolution of microstructure and mechanical properties of Inconel 625 alloy fabricated by laser powder bed fusion via novel hybrid scanning strategy

Tailoring Microstructure and Mechanical Properties of Additively Manufactured Inconel 625 by Remelting Strategy in Laser Powder Bed Fusion

Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion

Microstructure and mechanical property comparison of Inconel alloys fabricated using micro and conventional laser powder bed fusion

Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy

Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Microstructures and Mechanical Behaviors of Additive Manufactured Inconel 625 alloys via Selective Laser Melting and Laser Engineered Net Shaping

Origin of the anisotropic ductility and the dynamic recrystallization-like deformation behavior of laser powder bed fusion Inconel 625 at elevated temperature

A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

Effect of Scanning Angle on Grain Growth and Mechanical Properties of Ni10cr6w1fe9ti1 Hea

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Effect of Fe and C Contents on the Microstructure and High-Temperature Mechanical Properties of IN625 Alloy Processed by Laser Powder Bed Fusion

Mechanical Behavior of Laser Powder Bed Fusion Processed Inconel 625 Alloy

In Situ Alloying of a Modified Inconel 625 via Laser Powder Bed Fusion: Microstructure and Mechanical Properties

Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition

Tailored microstructure by using in-situ re-scanning and its influence on fatigue crack growth behavior of Inconel 718 fabricated by LPBF at elevated temperature