Abstract:Metal additive manufacturing (AM) enables customizable, on-demand parts, allowing for new designs and improved engineering performance. Yet, the ability to control AM metal alloy microstructures (i.e., grain morphology, crystallographic texture, and phase content) is lacking. This work performs corroborative neutron diffraction and large-scale electron backscatter diffraction (EBSD) measurements to assess crystallographic texture in electron beam melted (EBM) Ti-6Al-4V as a function of scan strategy and build height. Texture components for one raster and two spot melt scan strategies were evaluated using a triclinic specimen symmetry to capture all possible texture components, which were found to be considerably different than previously reported values from studies employing orthotropic specimen symmetry. This finding highlights the importance of a standard method and best practice for assessing textures produced by AM. Texture was found to vary between scan strategies, but changed minimally as a function of build height. Parent phase β-Ti reconstructions obtained from as-built crystallographic orientations revealed spot melt scan strategies produced finer equiaxed/columnar grains with clear 001 β build direction fiber textures, whereas the raster scan strategy produced large columnar grains and a weaker 001 β build direction fiber texture. The observed grain morphologies agree with those predicted by solidification theory for the thermal gradients and solidification velocities experienced during the build process. The presence of a strong 001 β fiber orientation (typical of cubic solidification) produced by spot melting was found to correlate with a previously unreported 01 1 ¯ 2 α fiber texture in the as-built condition and colony microstructures. The 01 1 ¯ 2 α fiber texture was weakly observed for the raster scan strategy, and 001 β oriented grains preferentially transformed into α' martensite with orientations between 1 1 ¯ 00 α and 11 2 ¯ 0 α . This shift in product α-Ti orientations has not yet been reported, and further work is recommended to understand these crystallographic signatures in the context of solid-state phase transformations. The presence of the 01 1 ¯ 2 α fiber texture is proposed as a useful diagnostic for evaluating the solidification or transformed microstructure condition (e.g., grain morphology and texture) of Ti-6Al-4V AM builds via accessible techniques like laboratory X-ray diffraction.

Part geometry-driven crystallographic texture control in a 3D-printed austenitic steel – a strategy for near-monocrystalline microstructure generation

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy

Stability of crystallographic texture in laser powder bed fusion: Understanding the competition of crystal growth using a single crystalline seed

Towards 3-D texture control in a β titanium alloy via laser powder bed fusion and its implications on mechanical properties

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting

Mapping the roles of scan strategy and build orientation in predicting the crystallographic texture and yield strength of 316L stainless steel produced by laser powder bed fusion

Considering interplay between multiple physical phenomena to elucidate single crystal-like texture, phase transformations, and mechanical behavior of directed energy deposited SS316L

In-situ study on the coordinated deformation mechanism of austenitic stainless steel with mixed crystal degree

Exploring crystallographic texture manipulation in stainless steels via laser powder bed fusion: insights from neutron diffraction and machine learning

Build Atmosphere Aided Texture Control in Additively Manufactured FeCrAl Steel by Laser Powder Bed Fusion

Effect of Scanning Angle on Grain Growth and Mechanical Properties of Ni10cr6w1fe9ti1 Hea

Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering

Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion

Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting

Microstructure and Texture Optimization by Static Recrystallization Originating from {10-12} Extension Twins in a Mg-Gd-Y Alloy

Computer simulation of microstructure development in powder-bed additive manufacturing with crystallographic texture

Two-Dimensional X-Ray Diffraction (2D-XRD) and Micro-Computed Tomography (Micro-CT) Characterization of Additively Manufactured 316L Stainless Steel

Texture tailored through combination of molten pool morphology and scanning path in laser additive manufacturing of alloy 718

Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V