Abstract:In this article, the preparation of high‐entropy‐alloy‐reinforced aluminum matrix composites by friction stir processing is focused on. To study the effect of different rotational speeds on the organization and properties of composites, at 1200 rpm min−1, the strength and hardness of composites are greatly improved compared with the matrix material, and the grains are refined to a certain extent. In the present investigation, the production of composites based on 7075Al is involved, reinforced with particles of high‐entropy alloy (AlCoCrFeNi), using the friction stir processing (FSP) technique. The primary objective is to examine how varying the rotational speed during processing affects the uniformity of the composite microstructure, the strength of the bonding between different materials, and the mechanical properties of the composite. In these findings, it is indicated that higher processing rotational speeds lead to enhanced homogeneity of the composite material and promote strong bonding with the matrix. The Al13Co4 phase is generated at the interface before the formation of the Al5Co2 phase. The microhardness of the composites exhibits an increase in hardness of 78%, 84%, 86%, and 83% compared to the hardness of the 7075Al. Similarly, the tensile strength is enhanced by 26%, 36.7%, 49%, and 40%, respectively. The broken surface shows an even spread of particles with many small depressions, which is a clear sign of a common type of fracture that can stretch without breaking. The primary processes that enhance the strength of the FeCoNiCrAl/7075Al composite manufactured by FSP include the load‐transfer effect, dispersion strengthening, grain refinement strengthening, and thermal mismatch strengthening.

Effect of Dynamic Recrystallization Mode on Texture Components and Hardness for Nano-SiC Particles Reinforced Aluminum Matrix Composites Prepared Via Friction Stir Processing

Effect of Mg on Nucleation Process of Recrystallization in Al–Mg–Si/SiCp Composite

Texture evolution of refill friction stir spot welding in alclad 2A12-T42 aluminum alloy

Crystallographic texture evolution during friction stir processing of AA7075 alloy

Effect of friction stir processing on grain orientation evolution and coincidence site lattice boundaries of Al6061

Particle-stimulated nucleation and recrystallization texture initiated by coarsened Al2CuLi phase in Al–Cu–Li alloy

Formation Mechanism of Cube Texture Components ({001}<100>) Associated with Dynamic Recrystallization During Compression in the Single BCC Phase Region of Ti-22Al-25Nb Alloy

The effect of deformation parameters on the dynamic recrystallization and microstructure evolution of the quasi-continuous network reinforced TiAl/B4C composites

Formation mechanism of Cube texture components ({001} ) associated with dynamic recrystallization during compression in the single BCC phase region of Ti-22Al-25Nb alloy

Characterization and Calculation of the Dynamic Recrystallization Texture in Fe-3.0 Wt.% Si Alloy

A Novel Way to Produce Bulk SiCp Reinforced Aluminum Metal Matrix Composites by Friction Stir Processing

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Friction Stir Processing of Copper-Coated SiC Particulate-Reinforced Aluminum Matrix Composite

Implications of nanomaterials reinforcement along with sub-zero temperature cooling on microstructure and mechanical properties of friction stir processed Al7075 alloy

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Enhanced grain refinement and texture weakening in Al–Mg–Si alloy through a novel thermomechanical processing

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

Influence of Silicon Carbide on Microhardness and Corrosion Behavior of AZ91/SiC Surface Composites Processed through Friction Stir Processing: Multi-Response Optimization Using Taguchi-Grey Relational Analysis

Microstructure and texture evolution of ultra-thin high grade non-oriented silicon steel used in new energy vehicle

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression

Effect of Rotational Speed on Microstructure and Properties of Al‐Based Composite Reinforced with High‐Entropy‐Alloy Particles Fabricated by Friction Stir Processing