Abstract:Adjustable ring-mode laser welding (ARM) provides a new solution for the pore defects of aluminum alloy joints. However, the inhibition mechanism of ARM for porosity defects in the aluminum alloy welds with medium-thickness is still lacking. In this work, the dynamic behavior of the keyhole/molten pool and the formation/transport process of bubbles during adjustable ring-mode laser welding of medium-thick aluminum alloy are investigated by experiments and simulations. The results display that the laser power ratio of central-ring beam of 6:4, the porosity is 4.19 ± 2.32 %, which is reduced by 52.2 % compared with the weld by single laser welding (SLW) of the same penetration depth. The addition of ring beam helps to enlarge the tilt angle of the keyhole rear wall, which increases the ability of the keyhole wall to resist the impact of the molten pool. Besides, it also lowers the radial pressure gradient and the local variation of the keyhole wall. These reasons reduce the formation of pores. Furthermore, the main eddy current direction of the molten pool changes less frequently, and the melt flow velocity impacting the keyhole wall only changes in the range of 0–0.5 m/s (SLW: 0.25–0.75 m/s). This diminishes the fluid dynamic pressure which is the primary driving force of the bubbles. The velocity of the bubble moving away from the bottom of the keyhole is decreased and it is more likely to remelt the keyhole and escape under the action of the laser beam at the next moment. This work provides engineering application and theoretical reference value for the suppression of pore defects in laser welding of aluminum alloy in medium-thick plates.

Study of Molten Pool Dynamics and Porosity Formation Mechanism in Full Penetration Fiber Laser Welding of Al-alloy

Study on Root Hump Formation Mechanism in Full Penetration Laser Welding with Backing Gas for Aluminum Alloy

Role of Welding Speed on Keyhole-Induced Porosity Formation Based on Experimental and Numerical Study in Fiber Laser Welding of Al Alloy

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Porosity Sensitivity of A356 Al Alloy During Fiber Laser Welding

Numerical Simulation of Spatter Formation During Fiber Laser Welding of 5083 Aluminum Alloy at Full Penetration Condition

Numerical Study of Keyhole Instability and Porosity Formation Mechanism in Laser Welding of Aluminum Alloy and Steel

Dynamic Behavior of Molten Pool Backside During Full-Penetration Laser Welding of Ni-based Superalloys

Porosity Mechanism of Fiber Laser Welding with Filler Wire for Aluminum Alloy

Mechanisms of the Porosity Formation During the Fiber Laser Lap Welding of Al 5754 Sheets

Porosity in fiber laser formation of 5A06 aluminum alloy

Investigation on the keyhole/molten pool dynamic behavior during adjustable ring-mode laser welding of medium-thick aluminum alloy

MECHANISMS OF THE POROSITY FORMATION DURING THE FIBER LASER LAP WELDING OF ALUMINIUM ALLOY

Relationship Between Molten Pool Behavior and Keyhole-Induced Porosity in Pulsed Laser-arc Hybrid Welding of Magnesium Alloy

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Numerical study of keyhole dynamics and porosity formation during high‐power oscillating laser welding of medium‐thick aluminum alloy plates

Thermal and Fluid Flow Characteristics and their Relationships with Porosity in Laser Welding of AA5083

Experimental Investigation and Numerical Study on the Elimination of Porosity in Aluminum Alloy Laser Welding and Laser–GMA Welding

Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy

Modeling of Keyhole-Induced Pore Formation in Laser-Arc Hybrid Welding of Aluminum Alloy with a Horizontal Fillet Joint

Porosity morphology and its evolution mechanism in laser mirror welding of 2219 aluminum alloy