Abstract:Adjustable ring-mode laser welding (ARM) provides a new solution for the pore defects of aluminum alloy joints. However, the inhibition mechanism of ARM for porosity defects in the aluminum alloy welds with medium-thickness is still lacking. In this work, the dynamic behavior of the keyhole/molten pool and the formation/transport process of bubbles during adjustable ring-mode laser welding of medium-thick aluminum alloy are investigated by experiments and simulations. The results display that the laser power ratio of central-ring beam of 6:4, the porosity is 4.19 ± 2.32 %, which is reduced by 52.2 % compared with the weld by single laser welding (SLW) of the same penetration depth. The addition of ring beam helps to enlarge the tilt angle of the keyhole rear wall, which increases the ability of the keyhole wall to resist the impact of the molten pool. Besides, it also lowers the radial pressure gradient and the local variation of the keyhole wall. These reasons reduce the formation of pores. Furthermore, the main eddy current direction of the molten pool changes less frequently, and the melt flow velocity impacting the keyhole wall only changes in the range of 0–0.5 m/s (SLW: 0.25–0.75 m/s). This diminishes the fluid dynamic pressure which is the primary driving force of the bubbles. The velocity of the bubble moving away from the bottom of the keyhole is decreased and it is more likely to remelt the keyhole and escape under the action of the laser beam at the next moment. This work provides engineering application and theoretical reference value for the suppression of pore defects in laser welding of aluminum alloy in medium-thick plates.

Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy

Modeling of Keyhole-Induced Pore Formation in Laser-Arc Hybrid Welding of Aluminum Alloy with a Horizontal Fillet Joint

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Experimental Investigation and Numerical Study on the Elimination of Porosity in Aluminum Alloy Laser Welding and Laser–GMA Welding

Keyhole-induced Pore Formation Mechanism in Laser-Mig Hybrid Welding of Aluminum Alloy Based on Experiment and Multiphase Numerical Model

Research on keyhole-induced porosity and melt flow kinetic behavior of 2219 alloy T-joint manufactured by dual laser-beam bilateral synchronous welding

Effect of Magnesium Content on Keyhole-Induced Porosity Formation and Distribution in Aluminum Alloys Laser Welding

Investigation on the keyhole/molten pool dynamic behavior during adjustable ring-mode laser welding of medium-thick aluminum alloy

Relationship Between Molten Pool Behavior and Keyhole-Induced Porosity in Pulsed Laser-arc Hybrid Welding of Magnesium Alloy

Porosity Formation and Its Effect on the Properties of Hybrid Laser Welded Al Alloy Joints

Numerical Study of Keyhole Instability and Porosity Formation Mechanism in Laser Welding of Aluminum Alloy and Steel

Porosity Sensitivity of A356 Al Alloy During Fiber Laser Welding

Effects of Keyhole Status on Melt Flow and Flow-Induced Porosity Formation During Double-Sided Laser Welding of AA6056/AA6156 Aluminium Alloy T-joint

Effect of droplet transition on the dynamic behavior of the keyhole during 6061 aluminum alloy laser-MIG hybrid welding

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Effect of beam defocusing on porosity formation mechanism in laser-MIG hybrid welded titanium alloy joints

Influence Of Arc Power On Keyhole-Induced Porosity In Laser Plus Gmaw Hybrid Welding Of Aluminum Alloy: Numerical And Experimental Studies

Mechanism of pore suppression in aluminum alloy laser-MIG hybrid welding based on alternating magnetic field

Numerical study of keyhole dynamics and porosity formation during high‐power oscillating laser welding of medium‐thick aluminum alloy plates

Study of Molten Pool Dynamics and Porosity Formation Mechanism in Full Penetration Fiber Laser Welding of Al-alloy