Abstract:Adjustable-ring-mode laser welding (ARM-LW) offers a novel approach to minimize porosity in medium-thickness aluminum alloy joints. However, the suppression mechanism and optimization strategy of reducing porosity for ring-mode laser remain unclear. A combination of experiment and simulation was utilized to narrow the gap. The findings demonstrated that ring-mode laser effectively slows the increase of porosity with rising penetration depth compared to traditional Gaussian laser welding. The pore formation involves bubble generation induced by keyhole instability and bubbles being captured by the solidification front. As ring power share increases, the keyhole opening widens and becomes more stable, which enhances the energy absorption of keyhole walls, particularly in the bottom and middle sections. This enhances the keyhole stability and reduces bubble formation resulting from keyhole collapse. Additionally, as ring power share grows, a decrease of 63.2 % of -X-velocity suggests that bubbles are moving at a slower pace away from the keyhole bottom, increasing the chances of them being captured by keyhole and eventually vanishing; however, a decrease of 52.4 % of +Z-velocity raises the possibility of bubbles being trapped by solidification front if not caught by keyhole. Finally, a comprehensive discussion and analysis of how to mitigate porosity during ARM-LW are presented. A criterion—minimizing penetration to spot diameter ratio (PDR)—was proposed to guide ring power share selection. The insights into keyhole fluctuation and bubble evolution mechanisms outlined here can guide mitigating porosity in laser welding of medium-thickness aluminum alloy plates.

Numerical study of keyhole dynamics and porosity formation during high‐power oscillating laser welding of medium‐thick aluminum alloy plates

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation

Investigation on the keyhole/molten pool dynamic behavior during adjustable ring-mode laser welding of medium-thick aluminum alloy

Effect of plate thickness on weld pool dynamics and keyhole-induced porosity formation in laser welding of Al alloy

Porosity inhibition of aluminum alloy by power-modulated laser welding and mechanism analysis

The effect of laser oscillation welding on porosity suppression for medium-thick Al alloy with high Mg content

Numerical Simulation on Porosity Formation and Suppression in Oscillation Laser Welding of Ti-6Al-4V Alloy

Mitigation of porosity in adjustable-ring-mode laser welding of medium-thick aluminum alloy

Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy

Study of porosity suppression in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy

Arc and keyhole behavior in narrow-gap oscillating laser-MIG hybrid welding of thick aluminum alloys

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Effect of beam oscillation frequency on porosity in laser welding of aluminum alloy lap-butt joints

Effect of multiple hit and break of oscillating pulse laser-TIG hybrid welding on porosity suppression of ultra-high strength steel

Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding

Study on the influence of Al-Si welding wire on porosity sensitivity in laser welding and process optimization

The investigation of molten pool dynamic behaviors during the “∞” shaped oscillating laser welding of aluminum alloy

Minimizing defects and controlling the morphology of laser welded aluminum alloys using power modulation-based laser beam oscillation

Simulation of the Effect of Keyhole Instability on Porosity during the Deep Penetration Laser Welding Process